Processor Settings Screen - Dell PowerEdge R510 Hardware Owner's Manual

Processor Settings Screen

Option
64-bit
Core Speed
Bus Speed
Logical Processor
(Enabled default)
Virtualization Technology
(Disabled default)
Adjacent Cache Line
Prefetch
(Enabled default)
Hardware Prefetcher
(Enabled default)
Execute Disable
(Enabled default)
Number of Cores per
Processor
(All default)
Turbo Mode
(Enabled default)
C States
(Enabled default)
Processor 1 Family -Model-
Stepping
Processor 2 Family -Model-
Stepping
66
Using the System Setup Program and UEFI Boot Manager
Description
Specifies if the processor(s) support 64-bit extensions.
Displays the processor clock speed.
Displays the processor bus speed.
Each processor core supports up to two logical
processors. If this field is set to Enabled, the BIOS
reports both logical processors. If set to Disabled,
only one logical processor is monitored by the BIOS.
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE:
Disable this feature if your system will not be
running virtualization software.
Enables high utilization of sequential memory access.
NOTE:
Disable this option for applications that require
high utilization of random memory access.
Enables or disables the hardware prefetcher.
Enables or disables Execute Disable Memory Protection
Technology.
If set to All, the maximum number of cores in each
processor is enabled.
If Turbo Boost Technology is supported by the
processor(s), enables or disables Turbo Mode.
When set to Enabled, the processor(s) can operate in all
available power states.
Displays the family, model, and stepping of the selected
processor.
Displays the family, model, and stepping of the
selected processor.