THORLABS vytran PTR308 User Manual page 5

PTR308 Automatic Recoater with Linear Proof Tester
!
!
Acetone is a flammable liquid. Do not dispense or use it near a source of heat.
!
Read the MSDS of the chemical you plan on using to clean the recoat mold.
!
!
Make sure all of the bare glass is covered with recoat material in each recoat cycle.
!
Unit uses compressed air, which can cause injury if used improperly.
Fuse can be replaced by twisting it to release, and then pulling it out of the housing; it is replaced by pushing the
fuse into the housing and then twisting it to lock in place. The fuse is 6.4 A, 250 V.
Rev C, October 19, 2020
Always put on eye protection before turning the lamps on.
Read the MSDS of the recoat material you plan on using.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Chapter 2: Safety
!
!
!
!
!
!
Page 3