THORLABS vytran PTR308 User Manual page 22

PTR308 Automatic Recoater with Linear Proof Tester
Advanced Parameters
Advanced parameters are accessed from the toolbar since they are rarely modified. The PTR308 advanced
parameters are defined as follows:
Shrink Factor:
Shrink Time:
Lamp Set 1 Start:
Lamp Set 1 Stop:
Lamp Set 2 Start:
Lamp Set 2 Stop:
Lamp Set 3 Start:
Lamp Set 3 Stop:
Lamp Set 4 Start:
Lamp Set 4 Stop:
Lamp Set 5 Start:
Lamp Set 5 Stop:
Lamp Set 6 Start:
Lamp Set 6 Stop:
Lamp Set 7 Start:
Lamp Set 7 Stop:
Lamp Set 8 Start:
Lamp Set 8 Stop:
Page 20
The Shrink Factor is the amount of material injected into the recoat mold during the
early stages of curing. This is entered as a percentage of the initial Inject volume, and
is intended to compensate for material shrinkage during cure. Typical values for Shrink
Factor are 3% to 6%.
Shrink Time specifies the time period over which any additional material is injected into
the mold during cure. It is expressed as a percentage (%) of Cure Time.
Specifies the switch-on time of Lamp Set 1 as a percentage (%) of Cure Time.
Specifies the switch-off time of Lamp Set 1 as a percentage (%) of Cure Time.
Specifies the switch-on time of Lamp Set 2 as a percentage (%) of Cure Time.
Specifies the switch-off time of Lamp Set 2 as a percentage (%) of Cure Time.
Specifies the switch-on time of Lamp Set 3 as a percentage (%) of Cure Time.
Specifies the switch-off time of Lamp Set 3 as a percentage (%) of Cure Time.
Specifies the switch-on time of Lamp Set 4 as a percentage (%) of Cure Time.
Specifies the switch-off time of Lamp Set 4 as a percentage (%) of Cure Time.
Specifies the switch-on time of Lamp Set 5 as a percentage (%) of Cure Time.
Specifies the switch-off time of Lamp Set 5 as a percentage (%) of Cure Time.
Specifies the switch-on time of Lamp Set 6 as a percentage (%) of Cure Time.
Specifies the switch-off time of Lamp Set 6 as a percentage (%) of Cure Time.
Specifies the switch-on time of Lamp Set 7 as a percentage (%) of Cure Time.
Specifies the switch-off time of Lamp Set 7 as a percentage (%) of Cure Time.
Specifies the switch-on time of Lamp Set 8 as a percentage (%) of Cure Time.
Specifies the switch-off time of Lamp Set 8 as a percentage (%) of Cure Time.
Chapter 7: VYT300C Handset Controller
TTN123729-D02