THORLABS vytran PTR308 User Manual page 4

PTR308 Automatic Recoater with Linear Proof Tester
Chapter 2 Safety
All statements regarding safety of operation and technical data in this instruction manual will only apply when the
unit is operated correctly.
Unplug the power cord before servicing the unit. Do not operate the unit without all covers and
!
Before connecting the AC power cord, make sure the source voltage is between 85 and 265 VAC,
47 - 63 Hz. Input voltages outside these ranges may result in damage to the unit.
!
The recoat material is a flammable, toxic, acrylate compound. Avoid contact with the skin and eyes.
!
Argon is a chemically inert gas. It is colorless, odorless, tasteless, non-flammable, non-corrosive
and non-toxic. However, the work area should be well ventilated as to ensure that the correct
!
Ensure that the operator is properly trained for the handling of compressed gases and regulators.
Small transparent fiber shards may be present in and around the work area, and as such, the
necessary measures should be taken to ensure the safety of the employee(s).
!
This unit must not be operated in explosive environments. The equipment should be used in a
standard laboratory environment with temperature and humidity control.
!
All materials (such as wipes and gloves) that have acrylate material on them should be disposed
!
Turn off the power to the unit before servicing electrical components, such as fuses or bulbs.
Page 2
SHOCK WARNING
items properly installed.
CAUTION
CAUTION
WARNING
oxygen level is maintained.
WARNING
WARNING
WARNING
with solid chemical waste.
WARNING
Chapter 2: Safety
!
!
!
!
!
!
!
TTN123729-D02