Labconco Purifier Axiom 30441 Technical Manual And Specifications page 11

Quickstart
How do I recalibrate the
✓ blower speed
✓ filter life gauge
✓ airflow sensor reading
10. If this is an initial certification or a recertification after supply
HEPA filter replacement, select
this is an annual recertification, select
If you want to set the filter gauge at a preset value, select
Gauge to new setting
11. The next certification screen will display the exhaust blower
motor's PWM setting. Press the
decrease the blower speed as needed. When the speed is set
properly, press the
speed setting, and continue to the filter life screen.
12. If this is an initial certification or a recertification after exhaust
HEPA filter replacement, select
this is an annual recertification, select
If you want to set the filter gauge at a preset value, select
Gauge to new setting
13. If the unit is has no airflow sensor, after the filter gauge option
is selected and you press
down, and then restart with the new settings. If the Unit has an
airflow sensor, you will then be asked to calibrate the inflow
sensor to match the value you obtained when you measured the
inflow. After the inflow is calibrated, and you press
the Axiom will power down, and then restart with the new
settings.
of the Axiom? - Continued
Reset Filter Gauge to 100%
Leave Gauge unchanged
OK/Mute
. Then press
▲ or ▼
OK/Mute
button to lock the new blower
Reset Filter Gauge to 100%
Leave Gauge unchanged
OK/Mute
. Then press
OK/Mute
, the Axiom will power
Product Service 1-800-522-7658
. If
.
Set
.
button to increase or
. If
.
Set
.
OK/Mute
,
C alibration
Inflow D isplay
The Inflow displayed
value is: 1 02 F PM
 
or t o change display value,
U V L ight t o reset t o 1 05 F PM,
O K t o select , ME N U t o f inish
11