Altronix NetWaySP8C Series Installation Manual page 4

Charging Current Output Selection Table:
Switch Position
SW 1 - Option 1
SW 1 - Option 2
2. Connect four (4) 12V lead acid or gel type batteries, connected in series to be charged to the terminals
marked [– BAT +] (Fig. 2, pg. 4). When use of stand-by batteries is desired, they can be lead acid or gel type.
If batteries are housed inside the enclosure, it must be properly ventilated.
Use included Altronix Vent2 kit and follow its installation instructions.
Note: When batteries are not used, a loss of AC will result in the loss of output voltage.
For outdoor battery backup, battery enclosure must have sufficient ventilation.
Security:
Please ensure that the cover is secured with key lock and screws.
Parameter
Number of Ports
Input Power
Requirements
Environmental
Conditions
Weights (approx.)
Fig. 2
Main Input
- 4 -
Battery Charging Current
2A
4A
Technical Specifications:
Description
Eight (8) ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports. Two (2) Gigabit SFP Ports.
NetWaySP8C3W2, NetWaySP8C3W5 - 115VAC, 60Hz, 3.5A or 230VAC, 50/60Hz, 2A.
NetWaySP8C7W2, NetWaySP8C7W5 - 277VAC, 50/60Hz, 1.75A.
Operating Ambient
Temperature
Storage Temperature
Relative Humidity
Operating Altitude
Model
NetWaySP8C3W2, NetWaySP8C7W2
NetWaySP8C3W5, NetWaySP8C7W5
Typical Applications:
L G N
Current Available for Devices (6.5A/360W total)
360W:
– 30ºC to 65ºC (– 22ºF to 149ºF)
240W:
– 30ºC to 70ºC (– 22ºF to 158ºF)
– 30ºC to 85ºC (– 22ºF to 185ºF)
85%, +/– 5%
– 304.8 to 2,000m
12.4 lb. (5.63 kg)
To four (4)
12VDC Stand-by
Batteries
EBC48
mounted below
NetWaySP8B
Fig. 2a
4.5A/240W
2.5A/130W
Product Weight
20 lb. (9.3 kg)
PoE/PoE+
or Hi-PoE
Device
PORT 6 PORT 4
Factory
Fiber to
Reset
Switch
NetWaySP8C Series Installation Guide
Shipping Weight
13.6 lb. (6.17kg)
22.1 (10.1 kg)
PoE/PoE+ IP
or Hi-PoE PoE/PoE+
Device Device
Fig. 2b
30W 60W
Operation
Fiber to the
next Netway Spectrum
Hardened PoE Switch*