Comeup CEP-2000-8MD Manual

CEP-2000-8/9/11/12/14/15MD
Model:
P/N: 271879-8MD 271410-9MD 278430-11MD 271420-12MD 277336-14MD 271430-15MD
 Feature
Lifting Capacity 2,000 kg, double fall load
3 phase 50 Hz 380V
Power Source
3 hp x 4 p
Motor
Grooved
Drum
10 mm x 22 m for PN:271879.271410
Wire Rope
10 mm x 28 m for PN:278430.271420
10 mm x 34 m for PN:277336.271430
Lifting Height
8 m for PN:271879，9 m for PN:271410，11 m for PN:278430
12 m for PN:271420，14 m for PN:277336，15 m for PN:271430
Lifting Speed 5.1 m/min, double fall load
Brake
Electromagnetic spring-applied failsafe brake
Control
Pendant switch w/cord 2.0 mm
 Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage
Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on single fall rope on the drum.
．The rope winding on the drum shall remain 3 wraps from the drum.
Information requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part
Electric Grooved Winch
2
x 5C x 3 m
Maintenance and Inspection
Classification of checks
Periodical
380V50Hz
Daily One Three
month month
◎
◎
◎ ◎
◎ ◎
Checking Item
One
year
Label and the
Marking
◎
like
Winding-in
direction of
◎
wire rope
Installation
Loosing and
Checking of
centre run-out
◎
installing bolts
foundation
Working
Condition of
Decomposition
clamping of
wiring
Wearing of Decomposition
◎
Control contact point
Outer damage
Switch
◎
of lead
Attaching
condition of
earth line
Measure with
Condition of
500v insulation-
◎
insulation
Resistance tester
Condition Measure with
◎
of insulation resistance tester
Motor
Staining Decomposition
◎
damage
Braking gap
◎
Wearing of Decomposition
◎
disc
Brake
Performance
Damage , Decomposition
◎
wearing
Gear
Condition of
◎
grease feeding
Checking
Checking Reference
Method
Visual Existence of label
Visual , Fleet angle
measuring θ=within 3.0 degree
Existence of abnormality
Manual Reasonable actuation
Confirming of accuracy
checking of fastening condition
To be free from
remarkable wearing and
checking
damage
To be free from exposure
Visual
of conductive wire
Existence of
Visual abnormalities of
connecting wires
1MΩ min
1MΩ min
Existence of
check abnormalities
Measuring Within 0.35 mm
To be free from
remarkable wear and
check
damage
Distance to be not more
than 1.5% of rope length
Visual
to be wound-in during 1
minute
To be free from
remarkable wear and
check
damage
Existence of suitability of
amount and deterioration
Measuring with grease Mobilux
EP2.Shell Unedo 2 or
Esso Beacon EP2