Spectrum Industries 68161 Assembly Instructions

Assembly Instructions
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts or
accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(2) 0184855
Accent panel bracket-
upper right
(2) 0184680
Accent panel bracket-
upper left
(4) 0184684
Accent panel bracket-
lower
Note if you are also installing a logo panel over the eLift workstation accent panels, you'll need to drill
out the starter holes on the back of the accent panel prior to installation. See the instruction included
with your logo panel for more information. The drilling needs to be completed before panel installation.
(2) 0184620
Accent panel
(8) 0100167
8-32 x 1/2" PH thrd ctg
(8) 021491
#8 x 1/2" PHSM
(4) 0101382
#14 x 7/8" PHSM
Accent Panels for eLift Workstation
(Elite Console)
68161
Assembly tip: Do not tighten component fasteners completely
until all have been installed. Keeping them loose will help with
alignment between parts during assembly.
0600007 Page 1 of 2