Spectrum Industries 37317 Assembly Instructions Manual

Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(1) 0106921
Table Base
1. Attach leg mechanisms & release to worksurface
1. Place worksurface face-down onto a non-abrasive surface.
2. Orient the leg mechanisms and release handle as shown and
align with the worksurface mounting holes. Figure 1A.
3. Attach the leg mechanisms and release handle to the worksurface
using (20) #14 x 7/8" PHSM screws and tighten securely.
4. Secure the cables to the worksurface with the included clips, (4)
#8 x 3/4" PHSM screws, and pre-drilled holes. Figure 1B.
Secure cables with (4) PHSM
screws & cable clips
(included with table legs)
Worksurface
Cable clip
Figure 1B
(1) Worksurface
(20) 0101382
#14 x 7/8" PHSM screw
Cable
Flex Flip Tables
(2) 053453
3/4" x 12" Hook and loop strap
Cables
Worksurface
37317
Phillips
Screwdriver
Hex wrench
(included
with base)
(8) #14 x 7/8" Leg
PHSM mechanism
(4) #14 x 7/8"
PHSM
Release
handle
0190035R1 Page 1 of 8
Figure 1A