Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Spectrum Industries Manuals
  4. Indoor Furnishing
  5. Flex Active 37239
  6. Owner's manual

Spectrum Industries Flex Active 37239 Owner's Manual

Table
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Owner's Manual
Flex Active Table
37239
Important
Before using this product:
• Read this manual
• Comply with all safety and operating instructions
• Ensure all parts and correct quantities are included
Any parts damaged during shipment must be reported
within 5 days of receipt. To report information regarding
missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
Thank you for purchasing Spectrum products!
Spectrum Industries, Inc
925 First Avenue, Chippewa Falls, WI 54729 USA
800 235 1262
715 723 6750
www.spectrumfurniture.com
™
(Shown with glides)
(Shown with casters, Cove
module and modesty panel)
0190534 Page 1 of 9

Advertisement

loading
Need help?

Need help?

Do you have a question about the Flex Active 37239 and is the answer not in the manual?

Questions and answers

Related Manuals for Spectrum Industries Flex Active 37239

Summary of Contents for Spectrum Industries Flex Active 37239

  • Page 1 Thank you for purchasing Spectrum products! Spectrum Industries, Inc 925 First Avenue, Chippewa Falls, WI 54729 USA 800 235 1262 715 723 6750 www.spectrumfurniture.com...
  • Page 2 • Do not step on, drive over, drag, or place objects on power cords. necessary, please contact Spectrum Industries for assistance. • For added safety, plug into a grounded outlet controlled by a GFI (Ground Fault Interrupter) circuit breaker.
  • Page 3 Assembly / Setup Phillips Cordless drill screwdriver with Phillips driver (best) 1. Attach worksurface brace 2. Install glides or casters 1. Place the worksurface face down (laminate side-down) onto a flat, 1. Thread the (4) glides or casters into the legs. Figure 2. non-abrasive surface like another table.
  • Page 4 4. Install modesty panel - Optional 1. Orient the modesty panel and corners as shown and lock together. 2. Place a mounting bracket inside each panel opening. Figure 4.1. Figure 4.2. o r n a n e t y P L e f d e s Mounting...
  • Page 5 5. Flip table upright 1. Carefully flip the table upright-this will take 2 people. Figure 5. CAUTION Do not allow the table legs to contact the floor until the table is completely rotated. Side- loading of the legs could cause damage. Figure 5 Ganging latch installation - 37238 - Optional 1.
  • Page 6 “Easy Power Connection” installation - Optional 1. Remove locking tabs from the Cove module and place 2. Replace locking tabs and secure with thumbscrews. Figure 7.2. into the worksurface cutout. Figure 7.1. “Easy Power” Cove Module Cove Module Worksurface Thumbscrews Worksurface cutout Figure 7.1 Figure 7.2...
  • Page 7 ™ Cove Power Module installation - Optional 1. Remove locking tabs from the Cove module. 3. Replace locking tabs and secure with thumbscrews. Figure 8.2. 2. Insert the power cord through worksurface cutout and place the Cove module into the cutout. Figure 8.1. Cove Module Cove Module Worksurface...
  • Page 8 Accessories (Available separately after initial configured purchased) Modesty Panel 37234 - (for 48"W table) 37235 - (for 60”W table) 37236 - (for 72"W table) • 16 ga steel • 9”H panel attaches to worksurface • Available with or without laminate insert •...

  • Page 9: Warranty

    • 10 Years • Cart Chassis • Lectern Chassis DESIGNED AND ASSEMBLED IN CHIPPEWA FALLS WISCONSIN.USA 925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM © 2017 Spectrum Industries Inc., All rights reserved. 0190534 Page 9 of 9...