Advertisement
Appendix A: NEXBOOT Configuration
a
a: nexBoot C
PPendIx
NEXBOOT is a feature designed to prevent issues by automatically resetting
the system if the clear WDT function fails. Follow the steps below to enable
and configure it in the BIOS.
1.
Immediately press the <Del> button when powering on the system,
then navigate using the arrow keys to select the BOOT section.
Copyright © 2025 NEXCOM International Co., Ltd. All Rights Reserved.
onfIguratIon
2.
Navigate with the up or down keys to select the feature of NEXBOOT.
By default, the feature is disabled. Press the <Enter> button to enable it.
58
NSA 3200 User Manual
Advertisement
Need help?
Do you have a question about the NSA 3200 and is the answer not in the manual?
Questions and answers