Tektronix Type 82 PLUG-IN Instruction Manual page 7

Maximum Allowable Input Voltage Rating
600 volts combined dc and peak ac or 600 volts ac peak
to peak (not 1200 volts peak to peak).
Operating Modes
Channel A only.
Channel B only.
Chopped: Free-running electronic switching between chan-
nels at approximately a 100-kc or 1-mc rate, depending upon
the setting of an internal switch. Time duration of each
chopped trace segment is approximately 5 ysec at the 100-kc
rate and approximately 0.5 psec at the I-mc rate.
Alternate: Triggered electronic switching between channels
at the end of each sweep, during the retrace interval.
Polarity Inversion
Polarity can be inverted on either channel for comparison
of signals 180° out of phase,
Characteristics—Type 82
Mechanical
Construction: Aluminum-alloy chassis.
Finish: Photo-etched anodized panel.
Net weight: 4 Ibs. 12 oz.
Accessories Supplied With the Type 82
Qty. Part Number Description
2 010-129 Type P6008 10X attenuation passive
probes (for probe characteristics,
etc., refer to the probe instruction
Other accessories available for use with the Type
1-3