*15G065365000AR*
P/N: 15G065365000AR V1.0
Quick Installation Guide
MECAI-GH200
The User's Manual is available for download from the ASRock Rack's official website at http://
www.asrockrack.com.
Take note of the following precautions before installing the components or change any settings.
1.
Unplug the power cord from the wall socket before touching any components.
2.
To avoid damaging the components due to static electricity, NEVER place the components
directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety
grounded object before installation.
3.
Hold components by the edges and do not touch the ICs.
4.
Whenever uninstalling any components, place them on a grounded anti-static pad or in the bag
that comes with the components.
5.
When placing screws into the screw holes to secure any components to the barebone, please
do not over-tighten the screws! Doing so may damage both components and barebone.
2
Top View
4
4
Front Panel
No. Description
1
Control Panel & I/O Shield (depends on the specification of the server board)
2
HHHL PCIe5.0 x16 riser card drive bay
3
FHHL PCIe5.0 x16 riser drive bay
4
2 E1.S PCIe5.0 x4 drive bay
5
1+1 CRPS
1
2
5
7
9
11
12
1
3
4
2
5
1
Replace Server Board
Carefully unplug all cables and release
1
thumbscrews on the ser ver board to
remove them from the barebone.
Align the replaced server board with the
2
mounting holes
A f f i x t he screws clock w ise into t he
3
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws.
No.
3
10
11
12
6
8
10
12
5
Rear Panel
1
No. Description
1
2 Power ports for 1+1 CRPS 2000W connections
2
Rear Vent
www.asrockrack.com
Description
1
6 PWM hot-swap 60x76mm fans
2
Server board (ARLINGTON-MB)
3
PDB board
4
M.2 riser slot connected to M.2 riser board for 2 M-Key
5
BMC slot connected to BMC board
6
E1S board for 2 hot-swap E1.S (PCIe5.0 x4) drives
7
HHHL single-slot PCIe5.0 x16 for NVIDIA® ConnectX-7 NICs
8
FHHL dual-slot PCIe5.0 x16 for NVIDIA® BlueField-3 DPUs
9
IOR+IOL boards
2 E1.S (PCIe5.0 x4) drive bays
Control panel and LED indicators
1+1 CRPS 2000W
3
Control Panel
1
2
3
4
No. Description
1
UID Button w/ LED
2
Power Button w/ LED
3
System Reset Button
4
Micro USB Port (COM)
5
Mini DisplayPort (VGA)
6
IPMI RJ-45 LAN Port w/ LEDs
7
Type-A USB Port (USB3.2 Gen1)
2
MECAI-GH200
5
6
7
Need help?
Do you have a question about the MECAI-GH200 and is the answer not in the manual?
Questions and answers