OPT7 AURA PRO WITH SOUNDSYNC Installation Manual page 4

INSTALL CORRECTLY
1 2 3
On Off
AUTO
4 5 6
S+ M+
S- M-
7
8
2
3
1
STEP 6
Using the included 21Key E-Z Remote, select your desired
color or pattern.
1 Power-ON
2 Automatic Color Change
3 Power-OFF
4 Speed +/- 10 Levels
5 Mode +/- 24 Mode
6 Dimmer 10 Levels
7 Color Selection 9 Colors
8 Sound Sync Color Selection 3 Colors
NOTE: When you use this product, keep it within 10m/33ft
as much as possible.
STEP 4
Secure the light strips using the
zip ties to tie all the wiring away
from the moving components.
STEP 5
Connect the round connector from
the light strips to the control box
and ensure that each component
is properly installed and tightened.