Troubleshooting - Icom IC-03AT Instruction Manual

. Power does not come
ON when the [POWER]
SWITCH is turned.
‚ No sound comes from
the speaker.
3. Receive sensitivity is
low and only strong
signals are audible.
- 41 —
eBad connection of the battery
pack to the transceiver.
e The battery pack is exhausted.
e Squelch setting is turned too far
clockwise.
e External speaker or earphone is in
use.
e The battery pack is exhausted.
eBad connection of the flexible
antenna.
e [he antenna feedline is cut or
shorted (when using an external
antenna).
e Check the connection of the bat-
tery pack and correct any pro-
blems.
e Replace the battery pack with a
new опе or recharge it.
e Turn the [SOUELCH] CONTROL
counterclockwise until noise can
be heard. Turn clockwise so the
noise just disappears.
e Check if the external speaker plug
is inserted properly or if the-
external speaker cable is cut.
e Replace the battery pack with a.
new one ог recharge it.
eCheck the connection of the
antenna and correct any problems.
eCheck the feedline and correct.
any improper condition.