Icom IC-03AT Instruction Manual page 14

3-1 BATTERY
INSTALLATION
(1) USING THE IC-BP3
BATTERY PACK
(2) BATTERY CHARGING
zd Tus
The supplied IC-BP3 BATTERY PACK is rechargeable and can be
slipped ON or OFF the transceiver very easily.
To recharge the battery pack use the supplied BC-2bU WALL
CHARGER or the optional BC-3b AC BATTERY CHARGER, or a
12V-type cigarette lighter socket with the IC-CP1 CIGARETTE
LIGHTER CABLE.
1) Use a suitable. battery charger as shown. at right or use a stable
power source with an output voltage of DC 13.8V, or a 12V-type
cigarette lighter socket with the optional IC-CP1.
2) It is not necessary for the IC-BP3 BATTERY PACK to be
attached to the transceiver for recharging, but if it is, be sure that
the POWER SWITCH on the transceiver is turned completely
OFF before starting the charge.
' 3) It takes approximately 15 hours to charge the IC-BP3 BATTE RY
PACK completely.