Frequency Display; Memory Scan - Icom IC-03AT Instruction Manual

(1) МЕМОВҮ $САМ
[MS] EXAMPLE:
Press key
Display
1) Memorize ten desired frequencies into memory channels O to 9.
2) Adjust the [SQUELCH] CONTROL to quiet the noise output
from the speaker.
3) Push the [C] /[MS] key to start the scan.
"5" appears on the FREQUENCY DISPLAY and the. scan
Starts.
4) The scan stops when a signal is received. The scan will resume
after the signal goes away.
5) To clear the scan function, push the [A]/[CL] key or [PTT]
SWITCH, and the scan stops on the memory channel displayed.
e "S" disappears on the FREQUENCY DISPLAY.
Operating MEMORY SCAN.