Lock Function; Еомстіом - Icom IC-03AT Instruction Manual

[PS] EXAMPLE: | Operating PROGRAMMED SCAN with the frequency step rate
pre-set at TOkHz.
Frequency in МБ......................... 223.800M Hz
Frequency in Мб ара аа гай PX ww 223.980MHz
(Hold
down)
Press keys
Display
5-10 LOCK FUNCTION This function prevents accidental frequency and function changes.
1) Push and hold the [FUNC] SWITCH and push the [D] /[LOCK]
key. |
e "L" appears on the FREQUENCY DISPLAY.
e At this time, all keys are disabled.
2) To clear the LOCK FUNCTION, push and hold the [FUNC] |
SWITCH and push the [D] /[LOCK] key again. |
5-11 ВЕЕР TONE ON/OFF 1) Push and hold the [FUNC] SWITCH and push the [9] /[BEEP]
FUNCTION key to turn the BEEP TONE FUNCTION ON and OFF
alternately.
992. 2) When the BEEP TONE FUNCTION is ON, the beep sounds each
time a key is pushed.