Memory Writing - Icom IC-03AT Instruction Manual

(3) REVERSE DUPLEX
[REVERSE] EXAMPLE:
Press keys
Display
5-5 MEMORY WRITING
To reverse the transmit and the receive frequencies in DUPLEX
MODE, push and hold the [FUNC] SWITCH and push the
[6] /[REVERSE] key.
Reversing the transmit and receive frequencies in DUPLEX MODE
with the offset frequency pre-set at 1.6MHz.
The IC-O3AT can memorize a frequency, DUPLEX MODE, its
offset frequency, and tone number into a memory channel.
1) Set the desired frequency, DUPLEX MODE, etc., with the
procedures described previously.
2) Push and hold the [FUNC] SWITCH, push the [B]/[MW] key,
followed by a digit key which has the same number as the
memory channel number.
3) The transceiver has 10 memory channels, memory channels О to 9.
Some are special channels as described below.