Rii Ма - Icom IC-03AT Instruction Manual

(2) USING [4] OR [Y] KEY 1) Push the [#]/[4] ог [x]/[w] key, and the operating frequency
will increase or decrease with the frequency step rate.
2) In the same way, holding the key down, shift the operating fre-
quency up or down continuously.
[A] [Y] EXAMPLE: Setting the frequency with the frequency step rate pre-set at 10KHz.
Press keys
Display
5-3 SETTING FREQUENCY Push and hold the [FUNC] SWITCH, push [3] /[STEP] key and
STEP RATE then push a key to determine the step rate. The frequency step
rate allocated to each key is as follows:
[STEP] EXAMPLE: Setting the frequency step rate at bkHz.
(Release)
Press keys
Display