Subscribe to Our Youtube Channel
Related Manuals for IBASE Technology CMI300-997
Summary of Contents for IBASE Technology CMI300-997
- Page 1 CMI300-997 13th/12th Gen Intel® Core™ desktop SoC processors Mini-ITX System User Manual Version 1.0...
- Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).
- Page 3 • Cadmium: 100 ppm • Mercury: 1,000 ppm • Lead: 1,000 ppm • Bis(2-ethylhexyl) phthalate (DEHP): 1,000 ppm • Butyl benzyl phthalate (BBP): 1,000 ppm • Dibutyl phthalate (DBP): 1,000 ppm • Diisobutyl phthalate (DIBP): 1,000 ppm CMI300-997 User Manual...
-
Page 4: Important Safety Information
Do not disassemble, repair or or modify the device in any way. Disassembly, modification, or any attempt at repair could generate hazards and cause damage to the device, even bodily injury or property damage, and will void any warranty. CMI300-997 User Manual... -
Page 5: Warranty Policy
The arrangement of the peripherals • Software in use (such as OS and application software, including the version numbers) 3. If repair service is required, please go to the IBASE website to apply for an RMA number. CMI300-997 User Manual... -
Page 6: Table Of Contents
COM3 (J1) & COM4 (J3) RS-232 Ports ........27 2.5.10 DDR5 SO-DIMM Slot (J4 / J7) ..........28 2.5.11 Digital I/O Connector (J8) ............28 2.5.12 M.2 M2280 Slot (J9, J22) ............29 2.5.13 M.2 E2230 Slot (J12) .............. 30 CMI300-997 User Manual... - Page 7 Chipset Settings ..................66 Security Settings ................... 69 Boot Settings..................71 Save & Exit Settings................72 MEBx ....................73 Appendix ...................... 74 I/O Port Address Map ................75 Interrupt Request Lines (IRQ) ............... 77 Watchdog Timer Configuration .............. 78 CMI300-997 User Manual...
-
Page 9: Chapter 1 General Information
Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Optional Accessories • Specifications • Product View • Dimensions... -
Page 10: Introduction
1.1 Introduction The CMI300-997 features an LGA1700 socket supporting 13th and 12th Gen Intel® Core™ desktop SoC processors, offering exceptional performance for embedded systems. With dual DDR5 SO-DIMM slots, it accommodates up to 64GB of non-ECC memory at speeds of DDR5-5600/4800. The system supports multiple display outputs, including two DisplayPorts and one HDMI port. -
Page 11: Packing List
IBASE provide optional accessories as follows. Please contact us or your dealer if you need any. • DC power jack • Power adaptor and power cord (for DC power jack) • WiFi cable kit (KIT-16) • VESA mounting kit CMI300-997 User Manual... -
Page 12: Specifications
Dimensions 200mm(W)0 x 200mm(D) x 62mm(H) • With Active CPU Cooler, Optional Power adaptor • Others Power Requirement: +12~+24V DC-in • Operating System: Windows 10 /11, Ubuntu Weight 1.9 kg Certification CE, FCC Class B & LVD CMI300-997 User Manual... - Page 13 5 ~ 90% at 45 °C (non-condensing) Humidity • Vibration Operating: 1 Grms / 3~500Hz • Operating: 20 g / 11 ms Shock • Non-operating: 40 g / 11 ms All specifications are subject to change without prior notice. CMI300-997 User Manual...
-
Page 14: Product View
1.6 Product View CMI300-997 User Manual... - Page 15 General Information The above picture shows the screw holes for the optional VESA mounting kit. The above shows the power button at the center and four antenna screw holes. CMI300-997 User Manual...
-
Page 16: Dimensions
1.7 Dimensions Unit: mm CMI300-997 User Manual... -
Page 17: Chapter 2 Hardware Configuration
Chapter 2 Hardware Configuration The information provided in this chapter includes: • Installations • Information and locations of connectors... -
Page 18: Installations
4. To remove the module, press the clips outwards with your thumb and index finger of both hands. CMI300-997 User Manual... -
Page 19: Card Installation
2. Locate M.2 socket as shown in the images below. 3. Align the key of the M.2 card to the M.2 interface, and insert the card slantwise. 5. Push the M.2 card down, fix it onto the standoff with a screw. CMI300-997 User Manual... -
Page 20: Wifi / 4G / 5G Antenna Installation
Wall Mounting Installation 1. Attach the two mounting brackets and secure them with the supplied four screws as shown below. 2. Then prepare at least four screws (M3, 6 mm) to mount the device on the wall. CMI300-997 User Manual... -
Page 21: Com Ports & Dc Power Connectors
DCD, Data carrier detect DSR, Data set ready RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground Signal Name RS-232 RS-422 RS-485 Data- Data+ Ground Ground Ground CMI300-997 User Manual... - Page 22 • DC Power Input Connector (terminal block) Pin Assignment Pin Assignment Ground Ground +12V +12V CMI300-997 User Manual...
-
Page 23: Setting The Jumpers
Closed When two pins of a jumper are encased in a jumper cap, this jumper is closed, i.e. turned On. When a jumper cap is removed from two jumper pins, this jumper is open, i.e. turned Off. CMI300-997 User Manual... -
Page 24: Jumper & Connector Locations On Motherboard
2.3 Jumper & Connector Locations on Motherboard Motherboard: MI997 CMI300-997 User Manual... - Page 25 Hardware Configuration CMI300-997 User Manual...
-
Page 26: Jumpers Quick Reference
2.4 Jumpers Quick Reference Jumper Function Clear CMOS Clear ME AT/ATX Select LVDS Panel Power Selection LVDS Power Brightness Selection Sierra EM919x 5G card USB/PCIe Select 2.4.1 Clear CMOS Contents (JP1) Function Pin closed Illustration Normal Clear CMOS CMI300-997 User Manual... -
Page 27: Clear Me Contents (Jp2)
Hardware Configuration 2.4.2 Clear ME Contents (JP2) Function Pin closed Illustration Normal Clear ME 2.4.3 ATX & AT Power Mode Selection (JP3) Function Pin closed Illustration (default) CMI300-997 User Manual... -
Page 28: Lvds Panel Power Selection (Jp4)
2.4.4 LVDS Panel Power Selection (JP4) Function Pin closed Illustration 3.3V (default) 2.4.5 Sierra EM9191 5G Card USB/PCIe Select (JP6) Function Pin closed Illustration PCIe (default) CMI300-997 User Manual... -
Page 29: Connectors Quick Reference
J17, J16 LVDS Connectors (Channel A, Channel B) LCD Backlight Connector SATA Power Connector Audio Pin Header for Chassis Front Panel DC-In Power Connector SATA1, SATA2 SATA III Connectors CPU_FAN1, Fan Power Connectors SYS_FAN1 PCIE1 PCIe (x1) Slot CMI300-997 User Manual... -
Page 30: Com1 & Com2 Rs-232/422/485 Ports (Cn1)
RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator Ground COM1/COM2 RS-232/422/485 are jumperless, configurable in BIOS. Signal Name RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground CMI300-997 User Manual... -
Page 31: Displayport & Hdmi Port (Cn2)
Hardware Configuration 2.5.2 DisplayPort & HDMI Port (CN2) 2.5.3 USB 3.2 Connector (CN3) CMI300-997 User Manual... -
Page 32: Displayport (Cn4)
2.5.4 DisplayPort (CN4) 2.5.5 2.5 Gigabit LAN (Intel I226-LM) + USB3.2 (CN5) CMI300-997 User Manual... -
Page 33: Gigabit Lan (Intel I226-V) + Usb3.2 (Cn6)
Hardware Configuration 2.5.6 2.5 Gigabit LAN (Intel I226-V) + USB3.2 (CN6) 2.5.7 HD Audio Connector (CN7) CMI300-997 User Manual... -
Page 34: Front Panel Settings Connector (J2)
Orientation is not required when making a connection to this header. Power LED (Pins 7 and 8) This connector connects to the system power LED on control panel. This LED will light when the system turns on. CMI300-997 User Manual... -
Page 35: Com3 (J1) & Com4 (J3) Rs-232 Ports
COM3 (J1) & COM4 (J3) RS-232 Ports Signal Name Signal Name DCD, Data carrier detect RXD, Receive data TXD, Transmit data DTR, Data terminal ready Ground DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator Not Used CMI300-997 User Manual... -
Page 36: Ddr5 So-Dimm Slot (J4 / J7)
2.5.10 DDR5 SO-DIMM Slot (J4 / J7) 2.5.11 Digital I/O Connector (J8) Signal Signal Ground +5V(0.5A) OUT3 OUT1 OUT2 OUT0 CMI300-997 User Manual... -
Page 37: M2280 Slot (J9, J22)
Hardware Configuration 2.5.12 M.2 M2280 Slot (J9, J22) *J9/J22 supports NVME CMI300-997 User Manual... -
Page 38: E2230 Slot (J12)
2.5.13 M.2 E2230 Slot (J12) *J12 supports USB2.0 & PCIE x1 2.5.14 USB 2.0 Connector (J13) * Connector type: DF11-8S-PA66H Signal Signal VCC(0.5A) Ground Ground VCC(0.5A) CMI300-997 User Manual... -
Page 39: Sim Slot (J14)
Hardware Configuration 2.5.15 SIM Slot (J14) 2.5.16 M.2 B-key 3052 Slot (J15) *J15 supports Sierra EM9191 5G modules. CMI300-997 User Manual... -
Page 40: Lvds Connectors (J17, J16) (Channel A, Channel B)
2.5.17 LVDS Connectors (J17, J16) (Channel A, Channel B) Signal Signal TX0+ TX0- Ground Ground TX1+ TX1- Ground Ground TX2+ TX2- Ground Ground TXC+ TXC- Ground Ground TX3+ TX3- +3.3 / +5V +3.3 / +5V CMI300-997 User Manual... -
Page 41: Lcd Backlight Connector (J18)
Hardware Configuration 2.5.18 LCD Backlight Connector (J18) Signal Name Signal Name +12V Brightness Control Backlight Enable Ground 2.5.19 SATA Power Connector (J19) Signal Name Pin Signal Name Ground Ground +12V CMI300-997 User Manual... -
Page 42: Audio Pin Header For Chassis Front Panel (J20)
Audio Pin Header for Chassis Front Panel (J20) Signal Name Signal Name MIC IN_L Ground MIC IN_R LINE_R Sense Ground Sense LINE_L Sense Ground 2.5.21 DC-In Power Connector (J21) Signal Name Signal Name Ground Ground +12 ~ +24V +12 ~ +24V CMI300-997 User Manual... -
Page 43: Sata Iii Connector (Sata1, Sata2)
Hardware Configuration 2.5.22 SATA III Connector (SATA1, SATA2) 2.5.23 PCIe (x1) Slot (PCIE1) CMI300-997 User Manual... -
Page 44: Fan Power Connectors (Cpu_Fan1, Sys_Fan1)
2.5.24 Fan Power Connectors (CPU_FAN1, SYS_FAN1) Signal Name Ground +12V Rotation detection Control CMI300-997 User Manual... -
Page 45: Chapter 3 Driver Installation
Chapter 3 Driver Installation The information provided in this chapter includes: • ® Intel Chipset Software Installation Utility • VGA Driver • HD Audio Driver • LAN Drivers • Intel ® ME Drivers • Intel ® Serial I/O Drivers • ®... -
Page 46: Introduction
INF files for Plug & Play function for Intel chipset components. Follow the instructions below to complete the installation. 1. Click Intel on the left pane and then Intel(R) AlderLake-P Chipset Drivers, and Intel(R) Chipset Software Installation Utility on the right pane. CMI300-997 User Manual... - Page 47 3. When the Welcome screen to the Intel Chipset Device Software appears, click Next. 4. Accept the License Agreement and click Accept. 5. On the Readme File Information screen, click Install. 6. When installation has been completed, press Finish to complete the setup process. CMI300-997 User Manual...
-
Page 48: Vga Driver Installation
3.3 VGA Driver Installation 1. Click Intel on the left pane and then Intel(R) AlderLake-P Chipset Drivers, and Intel(R) HD Graphics Driver on the right pane. 2. When the Intel Graphics Driver Installer screen appears, click Begin installation. CMI300-997 User Manual... - Page 49 Click Start to start installing the new graphics driver. 5. The next screen will indicate that the new graphics driver is being installed. When the message “Installation complete!” appears, restart your system in order to apply the driver changes. CMI300-997 User Manual...
-
Page 50: Realtek Hd Audio Driver Installation
3.4 Realtek HD Audio Driver Installation 1. Before installing the audio drivers, run the batch file - Intel_Sound.bat in the directory shown in the picture below: I-12_Gen-P-1.0\Intel\AlderLake-P\Sound\Windows 10_11 Right-click Intel_Sound.bat and run the batch file as administrator. CMI300-997 User Manual... - Page 51 Realtek High Definition Audio Driver on the right pane. 3. On the Welcome screen of the InstallShield Wizard, click Next to install the drivers. 4. When the audio driver has been installed, click Finish to restart the computer. CMI300-997 User Manual...
-
Page 52: Lan Drivers Installation
3.5 LAN Drivers Installation 1. Click Intel on the left pane and then Intel(R) AlderLake-P Chipset Drivers, and Intel PRO LAN Network Drivers on the right pane. 2. Click Intel Drivers and Software. CMI300-997 User Manual... - Page 53 4. On the Setup Options screen, select the program features you want to be installed. Then click Next to continue. 5. On the Ready to Install the Program screen, click Install to begin the installation. 7. When the Install wizard Completed screen appears, click Finish. CMI300-997 User Manual...
-
Page 54: Intel® Me Drivers Installation
Components appears, click Next. 3. Accept the terms in the License Agreement and click Next. 4. On the next screen, click Next to install to the default folder. 5. Click Finish when the necessary components have been successfully installed. CMI300-997 User Manual... -
Page 55: Intel® Serial Io Drivers Installation
2. When the Welcome screen to the Intel® Serial IO appears, click Next. 3. Accept the terms in the license agreement and click Next. On the Readme File Information and Confirmation screens, click Next. Click Finish when the Completion screen appears. CMI300-997 User Manual... -
Page 56: Intel® Thunderbolt Drivers Installation
1. Click Intel on the left pane and then Intel(R) AlderLake-P Chipset Drivers, and Intel(R) Thunderbolt Drivers on the right pane. 2. Accept the terms in the license agreement and click Install. 3. When installation has been completed, click Restart. CMI300-997 User Manual... -
Page 57: Chapter 4 Bios Setup
Chapter 4 BIOS Setup This chapter the different settings available in the AMI describes BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Security Settings •... -
Page 58: Introduction
These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. CMI300-997 User Manual... -
Page 59: Main Settings
Set the time. Use the <Tab> key to switch System Time between the data elements. 4.4 Advanced Settings This section allows you to configure, improve your system and allows you to set up some system features according to your preference. CMI300-997 User Manual... - Page 60 Hyper-Threading Enable or disable Hyper-Threading Technology. Legacy Game When enable, pressing the scroll lock key will toggle Compatibility Mode the Efficient-cores between being parked when Scroll Lock LED is on and un-parked when LED is off. CMI300-997 User Manual...
- Page 61 Number of P-cores to enable in each processor Performance-cores package. Note: Number of Cores and E-cores are looked at together. When both are (0,0), Pcode will Active Efficient- enable all cores cores Hyper-Threading Enable or disable Hyper-Threading Technology. Enable/Disable AES (Advanced Encryption Standard) CMI300-997 User Manual...
- Page 62 Config TDP Configurable Processor Base Power (cTDP) Configuration Configurations Configurable Processor Base Power (cTDP) Mode as Configurable Nominal/ Level/ Leve2 / Deactivate TDP selection. TDP Boot Mode Deactivate option will set MSR to Nominal and MMIO to Zero. CMI300-997 User Manual...
- Page 63 BIOS Setup PCH-FW Configuration CMI300-997 User Manual...
- Page 64 • TPM 2.0 will restrict support to TPM 2.0 devices only. Device Select • Auto will support both with the default being set to TPM 2.0 deices if not found, and TPM 1.2 device will be enumerated. CMI300-997 User Manual...
- Page 65 BIOS Setup ACPI Settings BIOS Setting Description Enables / Disables the system ability to hibernate Enable (OS/S4 Sleep State). This option may be not effective Hibernation with some OS. CMI300-997 User Manual...
- Page 66 768 / 1280 x 960 / 1280 x 1024 / 1366 x 768 / 1440 x Panel Type 900 / 1600 x 900 / 1600 x 1200 / 1680 x 1050 / 1920 x 1080 / 1920 x 1200 Note: LVDS brightness control can only be controlled in Windows. CMI300-997 User Manual...
- Page 67 Serial Port Enables / Disables the serial port and select an optimal Configuration setting for the Super IO device. Serial Port 1 Configuration BIOS Setting Description Serial Port Mode Serial Port Loop Back/RS232/RS422/ RS485 Select mode select CMI300-997 User Manual...
- Page 68 Serial Port 2 Configuration BIOS Setting Description Serial Port Mode Serial Port Loop Back/RS232/RS422/ RS485 mode Select select Serial Port 3 Configuration Serial Port 4 Configuration CMI300-997 User Manual...
- Page 69 Options: Disabled / 50 °C / 60 °C / 70 °C / 80 °C These fields are the parameters of the hardware Temperatures / monitoring function feature of the motherboard. The Voltages values are read-only values as monitored by the system and show the PC health status. CMI300-997 User Manual...
- Page 70 AMI Graphic Output Protocol Policy CMI300-997 User Manual...
- Page 71 The maximum time the device will take before it properly reports itself to the Host Controller. Device power-up Auto uses default value for a Root port it is 100ms. delay But for a Hub port, the delay is taken from Hub descriptor. CMI300-997 User Manual...
- Page 72 If disabled, Ipv4 HTTP boot option will not be created. Assigns a period of time to press ESC key to abort PXE boot wait time the PXE boot. Assigns a number of times to check the presence Media detect count of media. CMI300-997 User Manual...
- Page 73 BIOS Setup NVMe Configuration CMI300-997 User Manual...
-
Page 74: Chipset Settings
4.5 Chipset Settings BIOS Setting Description System Agent (SA) System Agent (SA) parameters Configuration PCH-IO Configuration PCH parameters 4.5.1 System Agent (SA) Configuration BIOS Setting Description Graphics Configuration Configures the graphics settings. VT-d VT-d capability, Enabled/Disabled CMI300-997 User Manual... - Page 75 Aperture Size automatically enabled when selecting 2048 MB aperture. To use this feature, disable CSM support. PSMI Support PSM Enable/Disable DVMT Pre- Select MT 5.0 Pre-Allocated (Fixed) Graphics Allocated Memory size used by the Internal Graphics Device CMI300-997 User Manual...
- Page 76 (physical port). Once disabled, any USB devices Control plugged into the connector will not be detected by BIOS or OS. Power-On after Specify what state to go to when power is re-applied Power failure after a power failure (S3 state) CMI300-997 User Manual...
-
Page 77: Security Settings
BIOS Setup 4.6 Security Settings BIOS Setting Description Administrator Sets an administrator password for the setup Password utility. User Password Sets a user password. Secure Boot Configures Secure Boot. CMI300-997 User Manual... - Page 78 Restore Factory Forces system to user mode. Install factory default Keys Secure Boot key databases. Enables expert users to modify Secure Boot Policy Management variables without full authentication. CMI300-997 User Manual...
-
Page 79: Boot Settings
Number of seconds to wait for setup activation Timeout key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock Selects the keyboard NumLock state. State Quiet Boot Enables / Disables Quiet Boot option. Boot Option Priorities Sets the system boot order. CMI300-997 User Manual... -
Page 80: Save & Exit Settings
Saves the changes done so far as User Defaults. Defaults Restore User Restores the user defaults to all the setup options. Defaults Launch EFI Shell Attempts to launch EFI Shell application (Shell.efi) from filesystem from one of the available filesystem devices. device CMI300-997 User Manual... -
Page 81: Mebx
BIOS Setup 4.9 MEBx CMI300-997 User Manual... -
Page 82: Appendix
Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. • I/O Port Address Map • Interrupt Request Lines (IRQ) • Watchdog Timer Configuration... -
Page 83: I/O Port Address Map
0x00000050-0x00000053 System timer Intel(R) Active Management Technology - SOL 0x0000FFF8-0x0000FFFF (COM14) 0x000003F8-0x000003FF Communications Port (COM1) 0x000002F8-0x000002FF Communications Port (COM2) 0x000003E8-0x000003EF Communications Port (COM3) 0x000002E8-0x000002EF Communications Port (COM4) 0x00000000-0x00000CF7 PCI Express Root Complex 0x00000D00-0x0000FFFF PCI Express Root Complex CMI300-997 User Manual... - Page 84 Programmable interrupt controller 0x000000A0-0x000000A1 Programmable interrupt controller 0x000000A4-0x000000A5 Programmable interrupt controller 0x000000A8-0x000000A9 Programmable interrupt controller 0x000000AC-0x000000AD Programmable interrupt controller 0x000000B0-0x000000B1 Programmable interrupt controller 0x000000B4-0x000000B5 Programmable interrupt controller 0x000000B8-0x000000B9 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000004D0-0x000004D1 Programmable interrupt controller CMI300-997 User Manual...
-
Page 85: Interrupt Request Lines (Irq)
Intel(R) USB 3.10 eXtensible Host Controller - 1.20 IRQ 4294967290 (Microsoft) Intel(R) USB 3.20 eXtensible Host Controller - 1.20 IRQ 4294967291 (Microsoft) IRQ 4294967292 Standard SATA AHCI Controller IRQ 4294967293 PCI Express Root Port IRQ 4294967294 PCI Express Root Port CMI300-997 User Manual... -
Page 86: Watchdog Timer Configuration
**endptr; char SIO; printf("Fintek 81964 watch dog program\n"); SIO = Init_F81964(); if (SIO == 0) printf("Can not detect Fintek 81964, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); CMI300-997 User Manual... - Page 87 //--------------------------------------------------------------------------- void DisableWDT(void) unsigned char bBuf; Set_F81964_LD(0x07); //switch to logic device 7 bBuf = Get_F81964_Reg(0xFA); bBuf &= ~0x01; Set_F81964_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_F81964_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_F81964_Reg(0xF5, bBuf); //disable WDT //--------------------------------------------------------------------------- CMI300-997 User Manual...
- Page 88 (ucDid == 0x07) //Fintek 81964 { goto Init_Finish; F81964_BASE = 0x00; result = F81964_BASE; Init_Finish: return (result); //--------------------------------------------------------------------------- void Unlock_F81964 (void) outportb(F81964_INDEX_PORT, F81964_UNLOCK); outportb(F81964_INDEX_PORT, F81964_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81964 (void) outportb(F81964_INDEX_PORT, F81964_LOCK); //--------------------------------------------------------------------------- void Set_F81964_LD( unsigned char LD) CMI300-997 User Manual...
- Page 89 #define F81964_DATA_PORT (F81964_BASE+1) //--------------------------------------------------------------------------- #define F81964_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81964_UNLOCK 0x87 #define F81964_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81964(void); void Set_F81964_LD( unsigned char); void Set_F81964_Reg( unsigned char, unsigned char); unsigned char Get_F81964_Reg( unsigned char); //--------------------------------------------------------------------------- #endif // F81964_H CMI300-997 User Manual...
Need help?
Do you have a question about the CMI300-997 and is the answer not in the manual?
Questions and answers