IBASE Technology IB952 Series User Manual
  1. Manuals
  2. Brands
  3. IBASE Technology Manuals
  4. Computer Hardware
  5. IB952 Series
  6. User manual

IBASE Technology IB952 Series User Manual

Amd v2000™ 3.5” disk-size sbc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IB952 Series
AMD V2000™
3.5" Disk-Size SBC
User's Manual
Version 1.0
(August 2021)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IB952 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IBASE Technology IB952 Series

Summary of Contents for IBASE Technology IB952 Series

  • Page 1 IB952 Series AMD V2000™ 3.5” Disk-Size SBC User’s Manual Version 1.0 (August 2021)
  • Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”). Disclaimer IBASE reserves the right to make changes and improvements to the products described in this document without prior notice.
  • Page 3 Compliance This is a class B product. In a domestic environment, this product may cause radio interference in which case users may be required to take adequate measures. This product has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules.
  • Page 4 Important Safety Information Carefully read the precautions before using the board. Environmental conditions: • Use this product in environments with ambient temperatures between 0˚C and 60˚C. • Do not leave this product in an environment where the storage temperature may be below -20° C or above 70° C. To prevent from damages, the product must be used in a controlled environment.
  • Page 5 Warranty Policy • IBASE standard products: 24-month (2-year) warranty from the date of shipment. If the date of shipment cannot be ascertained, the product serial numbers can be used to determine the approximate shipping date. • -party parts: 12-month (1-year) warranty from delivery for the 3 -party parts that are not manufactured by IBASE, such as CPU, CPU cooler, memory, storage devices, power adapter, panel and touchscreen.

  • Page 6: Table Of Contents

    Table of Contents Chapter 1 General Information ..........1 Introduction ..................2 Features ....................2 Packing List ..................3 Optional Accessories ................3 Specifications ..................4 Block Diagram ..................6 Product View ............錯誤! 尚未定義書籤。 Dimensions ..................9 Chapter 2 Hardware Configuration .........

  • Page 7: Chapter 1 General Information

    Chapter 1 General Information The information provided in this chapter includes: • Features • Packing List • Specifications • Block Diagram • Product View • Board Dimensions...

  • Page 8: Introduction

    Introduction • IB952F is a 3.5-inch SBC based on AMD Ryzen™ V2000-series processor. The integrated graphics device on the AMD Ryzen V2000-series processor integrated graphics drives four DisplayPort interfaces. Aside from supporting two DDR4 with up to 64GB capacity, it features flexible I/O connections are provided by 2 x GbE, 3 x USB 3.1, 2 x USB 2.0, 2 x COM, 2x SATA III, 2 x M.2 (M2280 &...

  • Page 9: Packing List

    General Information Packing List Your IB952F package should include the items listed below. If any of the items below is missing, contact the distributor or dealer from whom you purchased the product. • IB952F Motherboard • Disk (for chipset drivers) •...

  • Page 10: Specifications

    Specifications Model Name IB952F-2748 IB952F-2718 Form Factor 3.5” Disk-Size SBC System • Windows 10 Operating System • Linux Ubuntu CPU Type AMD Ryzen™ V2748 AMD Ryzen™ V2718 CPU Speed 2.9 GHz / 4.15 GHz 1.7 GHz / 4.15 GHz Cache 8MB / L3;...
  • Page 11 General Information I/O Ports • 1 x DisplayPort (1.4, DP++) 3840 x 2160 at 60 Hz (depending on AMD support) • 1 x USB Type C (DisplayPort 1.2) 3840 x 2160 at Display 60Hz • 1 x dual-channel LVDS,1920 x 1080 at 60 Hz •...

  • Page 12: Block Diagram

    Block Diagram IB952 User’s Manual...

  • Page 13: Product View

    General Information Product View Top View ＊The photos above are for reference only. Some minor components may differ. IB952 User’s Manual...
  • Page 14 Oblique View I/O View Name Name COM1 Port 1 USB 3.1 Port (top) LAN2 Port 1 USB Type C (bottom) LAN1 Port 2 USB 2.0 Ports 2 USB 3.1 Ports DisplayPort * Connectors are listed from left to right positions. IB952 User’s Manual...
  • Page 15 General Information Dimensions IB952 User’s Manual...
  • Page 16 THIS PAGE IS INTENTIONALLY LEFT BLANK. IB952 User’s Manual...
  • Page 17 Chapter 2 Hardware Configuration This section provides information on jumper settings and connectors on the IB952F in order to set up a workable system. On top of that, you will also need to install crucial pieces such as the CPU and the memory before using the product.

  • Page 18: Installations

    Installations 2.1.1 Installing the Memory To install the modules, locate the memory slot on the board and perform the following steps: Align the key of the memory module with that on the memory slot and insert the module slantwise. Gently push the module in an upright position until the clips of the slot close to hold the module in place when the module touches the bottom of the slot.

  • Page 19: Setting The Jumpers

    Hardware Configuration Setting the Jumpers Set up and configure your IB952F by using jumpers for various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your use. 2.2.1 How to Set Jumpers Jumpers are short-length conductors consisting of several metal pins with a non-conductive base mounted on the circuit board.

  • Page 20: Jumper & Connector Locations On Ib952

    Jumper & Connector Locations on IB952 IB952 User’s Manual...

  • Page 21: Jumpers Quick Reference

    Hardware Configuration Jumpers Quick Reference Function Jumper Page CMOS Data Clearance JBAT1 EDP Panel Power Selections JP2 (For power) / LVDS Panel Power / Brightness Selections JP4 (For brightness) AT / ATX Mode Selections 2.4.1 CMOS Data Clearance (JBAT1) Function Pin closed Illustration Normal...
  • Page 22 2.4.2 EDP Panel Power Selections (JP1) Jumper Function Pin closed Illustration 3.3V (default) IB952 User’s Manual...
  • Page 23 Hardware Configuration 2.4.3 LVDS Panel Power / Brightness Selections (JP2 / JP4) Jumper Function Pin closed Illustration 3.3V (default) 3.3V (default) IB952 User’s Manual...
  • Page 24 2.4.5 AT/ATX Mode Selections (JP3) Function Pin closed Illustration ATX Mode (default) AT Mode IB952 User’s Manual...

  • Page 25: Connectors Quick Reference

    Hardware Configuration Connectors Quick Reference Function Connector Page COM1 Port COM2 Port EDP Panel Connector Digital I/O Connector LVDS Backlight Connector LVDS Panel Connector J7, J9 Audio Connector Front Panel Settings Connector CPU Fan Power Connector CPU_FAN1 SATA Power Connector DC-in Power Connector Display Port USB 3.1 Connector...
  • Page 26 2.5.1 COM1 RS-232/422/485 Ports (CN1) Signal Name Signal Name Data carrier detect Data set ready Receive data Request to send Transmit data Clear to send Data terminal ready Ring indicator Ground Signal Name RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground IB952 User’s Manual...
  • Page 27 Hardware Configuration 2.5.2 COM2 RS-232 Ports (J15) Remarks: HK_DF11-10S-PA66H Signal Name Signal Name Data carrier detect Receive data Transmit data Data terminal ready Ground Data set ready Request to send Clear to send Ring indicator IB952 User’s Manual...
  • Page 28 2.5.1 eDP Connector (CN8) Remarks: KEL_SSL00-40S Signal Name Signal Name eDP Vcc TXN0 eDP Vcc TXP1 eDP Vcc Ground eDP Vcc AUXP eDP Vcc AUXN Ground Ground +3.3V Ground EDP BKLT (+12V) Ground Hot Plug detect Ground Ground TXN3 TXP3 Back Light Control Ground Back Light Enable...
  • Page 29 Hardware Configuration 2.5.2 Digital I/O Connector (J16) Remarks: HK_DF11-10S-PA66H Signal Name Signal Name Ground OUT3 OUT1 OUT2 OUT0 IB952 User’s Manual...
  • Page 30 2.5.1 LVDS Backlight Connector (J14) Remarks: E-CALL_0110-161-040 Signal Name +12V Backlight Enable Brightness Control Ground IB952 User’s Manual...
  • Page 31 Hardware Configuration 2.5.3 LVDS CHB Connector (J7 - 2 , J9 - 1 Remarks: HIROSE_DF20G-20DP-1V(56) Signal Name Signal Name TX0P TX0N TX1P TX1N TX2P TX2N CLKP CLKN TX3P TX3N +3.3V +3.3V IB952 User’s Manual...
  • Page 32 2.5.4 Audio Connector (J5) Remarks: HK_DF11-12S-PA66H Signal Name Signal Name LINE OUT_L LINE OUT_R FRONT_JD LINE IN_L LINE IN_R LINE _JD MIC_L MIC_R MIC_JD IB952 User’s Manual...
  • Page 33 Hardware Configuration 2.5.5 Front Panel Settings Connector (J13) Remarks: E-CALL_0196-01-200-080 Signal Name Signal Name Power BTN Power BTN HDD LED+ HDD LED- Reset BTN Reset BTN Power LED+ Power LED- J18 is utilized for system indicators to provide light indication of the computer activities and switches to change the computer status.
  • Page 34 2.5.7 CPU Fan Power Connector (CPU_FAN1) Signal Name Signal Name Ground Rotation detection +12V Control IB952 User’s Manual...
  • Page 35 Hardware Configuration 2.5.1 SATA Power Connector (J10) Remarks: E-CALL_0110-071-040 Signal Name 2.5.2 DC-IN Power Connector (J6) Remarks: Yimtex 532VW4STR Signal Name +12V~+24V +12V~+24V IB952 User’s Manual...
  • Page 36 THIS PAGE IS INTENTIONALLY LEFT BLANK. IB952 User’s Manual...

  • Page 37: Chapter 3 Drivers Installation

    Chapter 3 Drivers Installation This chapter introduces installation of the following drivers: - AMD Ryzen V2000 Chipset Drivers - AMD Ryzen V2000 Graphics Drivers - Realtek High Definition Audio Driver - LAN Driver Installation...

  • Page 38: Introduction

    Introduction This section describes the installation procedures for software and drivers. The software and drivers are included with the motherboard. AMD Ryzen V2000 Chipset Drivers Installation Insert the disk enclosed in the package with the board. Click AMD on the left pane and then AMD Ryzen V2000 Chipset Drivers on the right pane.
  • Page 39 Driver Installation When the AMD Chipset Software has been installed successfully, click Close. IB952 User’s Manual...

  • Page 40: Amd Ryzen V2000 Graphics Drivers Installation

    AMD Ryzen V2000 Graphics Drivers Installation Click AMD on the left pane and then AMD Ryzen V2000 Graphics Drivers on the right pane. Click Install to agree to all the terms and conditions stated in the Radeon Software End User License Agreement. IB952 User’s Manual...
  • Page 41 Driver Installation The system is installing the AMD Display Drivers. Click Restart as recommended to complete installation. IB952 User’s Manual...

  • Page 42: Realtek High Definition Audio Driver Installation

    Realtek High Definition Audio Driver Installation Click AMD on the left pane and then Realtek High Definition Audio Driver on the right pane. On the Welcome screen of the InstallShield Wizard, click Next to start the setup process. When the driver has been successfully installed, click Finish. IB952 User’s Manual...

  • Page 43: Lan Driver Installation

    Driver Installation LAN Driver Installation Click LAN Card on the left pane and then Intel LAN Controller Drivers on the right pane. Click Intel(R) I21x Gigabit Networks Drivers. When the Welcome screen appears, click Next. IB952 User’s Manual...
  • Page 44 Accept the license agreement and click Next. On the Setup Options screen, tick the checkbox to select the desired driver(s) for installation. Then click Next to continue. The wizard is ready to begin installation. Click Install. When installation is complete, click Finish. IB952 User’s Manual...

  • Page 45: Chapter 4 Bios Setup

    Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Boot Settings •...

  • Page 46: Introduction

    4.1 Introduction The BIOS (Basic Input/Output System) installed in the ROM of your computer system supports AMD APU. The BIOS provides critical low-level support for standard devices such as disk drives, serial ports and parallel ports. It also provides password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system.

  • Page 47: Main Settings

    BIOS Setup 4.3 Main Settings BIOS Setting Description Sets the date. Use the <Tab> key to switch System Date between the data elements. Set the time. Use the <Tab> key to switch System Time between the data elements. 4.4 Advanced Settings This section allows you to configure, improve your system and allows you to set up some system features according to your preference.
  • Page 48 4.4.1 Trusted Computing BIOS Setting Description Option: Enable / Disable. OS will not show Security Device security device. TCG EFI protocol and INTIA Support interface will not be available. SHA256 PCR Bank Enables / Disables SHA256 PCR Bank. Schedule an operation for the security device. Pending operation Note: Your computer will reboot during restart in order to change state of security device.
  • Page 49 BIOS Setup 4.4.2 ACPI Settings BIOS Setting Description Enable ACPI Auto Enables / Disables BIOS ACPI auto Configuration configuration. Enable Hibernation Enables / Disables the system ability to hibernate (OS/S4 Sleep State). This option may be not effective with some OS. ACPI Sleep State Selects an ACPI sleep state where the system will enter when the Suspend button is pressed.
  • Page 50 4.4.3 LVDS Configuration BIOS Setting Description LVDS Control Enables / Disables LVDS. Panel Color Depth Options: 18 BIT, 24 BIT LVDS Channel Type Options: Single, Dual Selects the resolution of your panel. Options: 800 x 480 / 800 x 600 / 1024 x 768 / Panel Type 1024 x 800 / 1024 x 960 / 1280 x 1024 / 1366 x 768 / 1440 x 900 / 1600 x 900 / 1600 x 1200 /...
  • Page 51 BIOS Setup 4.4.4 F81804 Super IO Configuration BIOS Setting Description Standby Power On S5 (ERP) Enables / Disables the standby power. Sets parameters of Serial Ports. Serial Port Configuration Enables / Disables the serial port and select an optimal setting for the Super IO device. Serial Port 1 Configuration IB952 User’s Manual...
  • Page 52 Serial Port 2 Configuration IB952 User’s Manual...
  • Page 53 BIOS Setup 4.4.5 Hardware Monitor BIOS Setting Description Enables / Disables the CPU smart fan feature. CPU Fan Smart Fan Control Options: Disabled / 50 °C / 60 °C / 70 °C / 80 °C Enables / Disables the system smart fan feature. System Smart Fan Control Options: Disabled / 50 °C / 60 °C / 70 °C / 80 °C...
  • Page 54 4.4.6 CPU Configuration IB952 User’s Manual...
  • Page 55 BIOS Setup 4.4.7 IDE Configuration IB952 User’s Manual...
  • Page 56 4.4.8 AMI Graphic Output Protocol Policy IB952 User’s Manual...
  • Page 57 BIOS Setup 4.4.9 USB Configuration BIOS Setting Description Enables Legacy USB support. • Auto disables legacy support if there is no Legacy USB Support USB device connected. • Disable keeps USB devices available only for EFI applications. This is a workaround for OSes without XHCI XHCI Hand-off hand-off support.
  • Page 58 4.4.10 Network Stack Configuration BIOS Setting Description Network Stack Enable/Disable UEFI Network Stack Enable/Disable IPv4 PXE boot support. If IPv4 PXE Support disabled, IPv4 PXE boot support will not be available Enable/Disable IPv4 HTTP boot support. If IPv4 HTTP Support disabled, IPv4 HTTP boot support will not be available Enable/Disable IPv6 HTTP boot support.
  • Page 59 BIOS Setup 4.4.11 NVMe Configuration IB952 User’s Manual...
  • Page 60 4.4.12 AMD CBS IB952 User’s Manual...

  • Page 61: Chipset Settings

    BIOS Setup 4.5 Chipset Settings 4.5.1 SB USB Configuration 4.5.1.1. XHCI Ports 4.5.2 North Bridge Configuration IB952 User’s Manual...

  • Page 62: Security Settings

    4.6 Security Settings BIOS Setting Description Administrator Sets an administrator password for the setup Password utility. User Password Sets a user password. HDD Security HDD Security Configuration for selected drive Configuration Secure Boot Secure Boot Configuration IB952 User’s Manual...
  • Page 63 BIOS Setup BIOS Setting Description Secure Boot feature is active if Secure Boot enabled. Platform Key(PK) is enrolled and the Secure Boot system is in user mode. The mode change requires platform reset. Secure Boot mode options: Standard or Custom. Secure Boot Mode In Custom mode, Secure Boot Policy variables can be configured by a physically present user...

  • Page 64: Boot Settings

    4.7 Boot Settings BIOS Setting Description Setup Prompt Number of seconds to wait for setup activation Timeout key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock Selects the keyboard NumLock state. State Quiet Boot Enables / Disables Quiet Boot option. FIXED BOOT Sets the system boot order.

  • Page 65: Save & Exit Settings

    BIOS Setup 4.8 Save & Exit Settings BIOS Setting Description Save Changes and Exits system setup after saving the changes. Exit Discard Changes and Exits system setup without saving any changes. Exit Save Changes and Resets the system after saving the changes. Reset Discard Changes and Resets system setup without saving any...
  • Page 66 THIS PAGE IS INTENTIONALLY LEFT BLANK. IB952 User’s Manual...

  • Page 67: Appendix

    Appendix This section provides the mapping addresses of peripheral devices, the sample code of watchdog timer configuration, and types of on-board connectors.

  • Page 68: I/O Port Address Map

    I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used. Address Device Description 0x00000A00-0x00000A0F Motherboard resources 0x00000A10-0x00000A1F Motherboard resources 0x00000E80-0x00000E8F...
  • Page 69 Appendix Address Device Description 0x00000090-0x0000009F Motherboard resources 0x000000A2-0x000000BF Motherboard resources 0x000000B1-0x000000B1 Motherboard resources 0x000000E0-0x000000EF Motherboard resources 0x000004D0-0x000004D1 Motherboard resources 0x0000040B-0x0000040B Motherboard resources 0x000004D6-0x000004D6 Motherboard resources 0x00000C00-0x00000C01 Motherboard resources 0x00000C14-0x00000C14 Motherboard resources 0x00000C50-0x00000C51 Motherboard resources 0x00000C52-0x00000C52 Motherboard resources 0x00000C6C-0x00000C6C Motherboard resources 0x00000C6F-0x00000C6F Motherboard resources 0x00000CD0-0x00000CD1...

  • Page 70: Interrupt Request Lines (Irq)

    Interrupt Request Lines (IRQ) Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board. Level Function IRQ 0 High precision event timer IRQ 0 System timer IRQ 8 High precision event timer IRQ 7...

  • Page 71: Onboard Connector Types

    Appendix Onboard Connector Types Compatible Mating Function Connector Onboard Type Type for Reference COM2 RS-232 Hao Guo Xing Ye HRS DF11-10DS-2C Ports DF11-10S-PA66H Hao Guo Xing Ye Hirose Audio DF11-12S-PA66H DF11-12DS-2C SATA HDD E-Call Power 0110-071-040 XHP-4 Digital I/O Hao Guo Xing Ye HRS DF11-10DS-2C Connector DF11-10S-PA66H...

This manual is also suitable for:

Ib952f-2748Ib952f-2718

Table of Contents