Related Manuals for IBASE Technology AGS104T
Summary of Contents for IBASE Technology AGS104T
- Page 1 AGS104T Ultra-Compact IoT Gateway Edge Computing System with Intel® Atom® x7000RE Processors User’s Manual Version 1.0 (October 2024)
- Page 2 No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).
- Page 3 • Cadmium: 100 ppm • Mercury: 1,000 ppm • Lead: 1,000 ppm • Bis(2-ethylhexyl) phthalate (DEHP): 1,000 ppm • Butyl benzyl phthalate (BBP): 1,000 ppm • Dibutyl phthalate (DBP): 1,000 ppm • Diisobutyl phthalate (DIBP): 1,000 ppm AGS104T User’s Manual...
-
Page 4: Important Safety Information
Avoid Disassembly Disassembling, repairing, or modifying the device is discouraged, as it may pose hazards, cause damage to the device, or lead to injury or property damage. Additionally, it will void the warranty. AGS104T User’s Manual... -
Page 5: Warranty Policy
Detailed description of the problem • The error messages in text or in screenshots if there is any • The arrangement of the peripherals • Software in use (such as OS and application software, including the version numbers) AGS104T User’s Manual... -
Page 6: Table Of Contents
J6: DC-in Connector (DINKLE_ECH381RM-03P) ....27 2.4.16 J7: Memory Socket ..............28 2.4.17 J8: M.2 (B-Key) Socket ............28 2.4.18 J11: Nano SIM Card Slot (for M.2 B-Key socket) ....29 2.4.19 J12: M.2 (E-Key) Socket ............29 AGS104T User’s Manual... - Page 7 Advanced Settings ................50 Chipset Settings ..................59 Security Settings ................... 61 Boot Settings..................62 Save & Exit Settings................63 Appendix ...................... 64 I/O Port Address Map ................65 Interrupt Request Lines (IRQ) ............... 67 Watchdog Timer Configuration .............. 68 AGS104T User’s Manual...
-
Page 9: Chapter 1 General Information
Chapter 1 General Information The information provided in this chapter includes: • Introduction • Features • Specifications • Product View • Dimensions... -
Page 10: Introduction
1.1 Introduction The AGS104T Ultra-Compact IoT Gateway Edge Computing System is a robust fanless solution designed for edge computing applications, leveraging the power of Intel® Atom® x7433RE/x7211RE processors. Integrated with the IBASE MBE104T board, this system offers versatile connectivity options including HDMI, DisplayPort, and USB Type-C supporting both DP &... -
Page 11: Specifications
• 1x 3-pin DC-in terminal block for 9V-36V • 1x Antenna hole • 2x RS232/422/485 ports for COM#3/COM#4 • 1x 4-in & 4-out GPIO with isolation • 2x RS232/422/485 ports for COM#1/COM#2 Left Panel External I/O • 1x Antenna hole • 1x Line-out/ Mic-in AGS104T User’s Manual... - Page 12 Relative Humidity 5~90% @ 45°C, (non-condensing) • Vibration Operating: 0.5Grms / 5~500Hz • Non-operating: 1Grms / 5~500Hz • Shock Operating: 30G/11 ms Duration • Non-operating: 40G/11 ms Duration All specifications are subject to change without prior notice. AGS104T User’s Manual...
-
Page 13: Product View
General Information 1.4 Product View AGS104T User’s Manual... - Page 14 Power Button USB 2.0 Port DC-In (9V ~ 36V ) Type C Connector USB 3.2 Ports COM3/COM4 Ports GbE LAN Ports Isolated 4-In & 4-Out GPIO DisplayPort Audio Line Out HDMI COM1/COM2 Ports Antenna Holes SIM Card Slot AGS104T User’s Manual...
- Page 15 General Information Wall Mounting DIN Rail Mounting AGS104T User’s Manual...
-
Page 16: Dimensions
1.5 Dimensions Unit: mm AGS104T User’s Manual... -
Page 17: Chapter 2 Hardware Configuration
Chapter 2 Hardware Configuration The information provided in this chapter includes: • Installations • Information and locations of connectors... -
Page 18: Installations
2. Gently push the module in an upright position until the clips of the slot close to hold the module in place when the module touches the bottom of the slot. To remove the module, press the clips outwards with both hands, and the module will pop-up. AGS104T User’s Manual... -
Page 19: Mini-Pcie & M.2 Cards Installation / Replacement
1. Thread and fasten the hex nut and the 2. Apply adhesive around here. washer. Then install the antenna. Info: The diameter of the nut is around 6.35 mm (0.25”-36UNC). AGS104T User’s Manual... -
Page 20: Mounting Installation
2.1.4.1. Wall-Mounting Installation 1. Turn your product upside down to attach the mounting brackets to your product and secure with the supplied 4 screws. 2. Prepare at least 4 screws (M3) to install the device on wall. AGS104T User’s Manual... - Page 21 1. Attach the DIN rail mounting bracket to your product, and secure with the supplied 2 screws. 2. Hook the DIN rail mounting bracket over the top of the DIN rail, and then press the lower section of the bracket towards the DIN rail to clip the bracket onto it. AGS104T User’s Manual...
-
Page 22: Pinout For Com Ports, Dc-In Power Connector & Line-Out Jack
RS-422 RS-485 DCD, Data carrier detect DATA- RXD, Receive data DATA+ TXD, Transmit data DTR, Data terminal ready RX- Ground Ground Ground DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator AGS104T User’s Manual... - Page 23 Hardware Configuration 2.1.5.2. COM3 & COM4 Port RS-232/422/485 Assignment RS-232 RS-422 RS-485 DATA- DATA+ Ground Ground Ground AGS104T User’s Manual...
- Page 24 Pin Assignment Pin Assignment Power Ground 9V ~ 36V Case Ground 2.1.5.4. Isolated 4-In & 4-Out GPIO Connector (10-pin terminal block) Pin Assignment Pin Assignment Isolation +5V OUT0 OUT1 OUT2 OUT3 Isolation Ground 2.1.5.5. Audio Line-Out Jack AGS104T User’s Manual...
-
Page 25: Setting The Jumpers
1 2 3 When two pins of a jumper are encased in a jumper cap, this jumper is closed, i.e. turned On. When a jumper cap is removed from two jumper pins, this jumper is open, i.e. turned Off. AGS104T User’s Manual... -
Page 26: Motherboard Jumper & Connector Locations
2.3 Motherboard Jumper & Connector Locations MBE104T Motherboard AGS104T User’s Manual... - Page 27 Hardware Configuration AGS104T User’s Manual...
-
Page 28: Motherboard Jumpers And Connectors
2.4 Motherboard Jumpers and Connectors 2.4.1 JP3: Mini PCIe Select for PCIe or mSATA Function Pin closed Illustration mSATA PCIe AGS104T User’s Manual... -
Page 29: Jp2: Power Failure Mode Setting
Hardware Configuration 2.4.2 JP2: Power Failure Mode Setting Function Pin closed Illustration ATX Mode AT Mode 2.4.3 SW2: Clear CMOS Setting Function Setting Normal (default) P1-OFF Clear CMOS P1-ON AGS104T User’s Manual... -
Page 30: J3/Sw1: Power Button And Power On Led Connector
2.4.4 J3/SW1: Power Button and Power On LED Connector J3: TECHBEST_01017021001-L Pin Signal Name Ground Power Button AGS104T User’s Manual... -
Page 31: Cn1: Usb 3.2 Connector
Hardware Configuration 2.4.5 CN1: USB 3.2 Connector 2.4.6 CN3: USB 3.2 Dual Connector 2.4.7 CN4, CN5: RJ-45 Connector (I226IT) AGS104T User’s Manual... -
Page 32: Cn6: Dp Connector
2.4.8 CN6: DP Connector 2.4.9 CN7: HDMI Connector AGS104T User’s Manual... -
Page 33: Cn2: Type-C Connector
Hardware Configuration 2.4.10 CN2: Type-C Connector 2.4.11 CN8: Audio Connector AGS104T User’s Manual... -
Page 34: J1: Nano Sim Card Slot (For Mini Pcie Socket)
2.4.12 J1: Nano SIM Card Slot (for Mini PCIe socket) 2.4.13 J2: Reset Button Connector J2: TECHBEST_01017021001-L Pin Signal Name Ground Reset Button AGS104T User’s Manual... -
Page 35: J4: Spi Flash Connector
Hardware Configuration 2.4.14 J4: SPI Flash Connector 2.4.15 J6: DC-in Connector (DINKLE_ECH381RM-03P) Signal Name Power Ground Case Ground +9V to +36V AGS104T User’s Manual... -
Page 36: J7: Memory Socket
2.4.16 J7: Memory Socket 2.4.17 J8: M.2 (B-Key) Socket AGS104T User’s Manual... -
Page 37: J11: Nano Sim Card Slot (For M.2 B-Key Socket)
Hardware Configuration 2.4.18 J11: Nano SIM Card Slot (for M.2 B-Key socket) 2.4.19 J12: M.2 (E-Key) Socket ◆ J12: For WLAN & BT connection (PCIe + USB2.0) AGS104T User’s Manual... -
Page 38: J13: Daughter Board Connector (For Ip801)
DTR, Data terminal ready COM4 COM4 RTS, Request to send DCD, Data carrier detect COM4 COM4 CTS, Clear to send RXD, Receive data COM4 COM4 RI, Ring indicator TXD, Transmit data COM4 USB_D+ DTR, Data terminal ready USB_D- 5VDUAL AGS104T User’s Manual... -
Page 39: Ip801: Daughter Board
Hardware Configuration 2.4.21 IP801: Daughter Board AGS104T User’s Manual... -
Page 40: J14: Mini Pcie Socket
2.4.22 J14: Mini PCIe Socket ◆ J14 supports mSATA [USB 2.0 + PCIe + SATA] AGS104T User’s Manual... -
Page 41: Cn9/Cn10: Com1/Com2 Connector
RXD, Receive data RTS, Request to send TXD, Transmit data CTS, Clear to send DTR, Data terminal ready RI, Ring indicator GND, ground Not Used Pin # Signal Name RS-232 R2-422 RS-485 DATA- DATA+ Ground Ground Ground AGS104T User’s Manual... -
Page 42: Led2: Blue Led Indicator For Wlan Status
2.4.24 LED2: Blue LED Indicator for WLAN Status AGS104T User’s Manual... -
Page 43: Led3: Red Led Indicator For Hdd Status
Hardware Configuration 2.4.25 LED3: Red LED Indicator for HDD Status 2.4.26 LED4: Yellow LED Indicator for B-Key WWAN Status AGS104T User’s Manual... -
Page 44: Chapter 3 Driver Installation
Chapter 3 Driver Installation The information provided in this chapter includes: • ® Intel Chipset Software Installation Utility • Graphics Driver Installation • HD Audio Drivers Installation • ® Intel ME Drivers Installation • ® Intel Serial I/O Drivers Installation •... -
Page 45: Introduction
Chipset drivers should be installed first before the software drivers to install INF files for Plug & Play function for the chipset components. Follow the instructions below to complete the installation. 1. Click Intel and then Intel(R) Amston Lake Chipset Drivers. AGS104T User’s Manual... - Page 46 Chipset Device Software appears, click Next. 4. Accept the terms of the software license agreement. Click Next. 5. On the Readme File Information screen, click Install and then Next. 6. When the driver is completely installed, click Finish. AGS104T User’s Manual...
-
Page 47: Graphics Driver Installation
Driver Installation 3.3 Graphics Driver Installation 1. Click Intel and then Intel(R) Amston Lake Chipset Drivers. 2. Click Intel(R) Amston Lake Graphics Driver. 3. In the Intel Software License Agreement screen, click I agree. AGS104T User’s Manual... - Page 48 4. Click Start for the Installer to install the components shown below. 5. You need to restart your system in order to apply the driver changes. Click Finish. AGS104T User’s Manual...
-
Page 49: Intel® Amston Lake Graphics Driver Installation
2. Click Intel(R) Amston Lake Graphics Driver. 3. Agree to the terms of the license agreement, and click Next. 4. Click Next to install the components shown below. 5. After installation has been completed, restart your system. Click Finish. AGS104T User’s Manual... -
Page 50: Realtek Hd Audio Driver Installation
1. Click Intel and then Intel(R) Amston Lake Chipset Drivers. 2. Click Realtek High Definition Audio Driver. 3. On the Welcome screen of the InstallShield Wizard, click Next. 4. After installation has been completed, restart the computer for changes to take effect. AGS104T User’s Manual... -
Page 51: Realtek Audio Dch Drivers Installation
3.6 Realtek Audio DCH Drivers Installation 1. Click Intel and then Intel(R) Amston Lake Chipset Drivers. 2. Click Realtek Audio DCH Drivers. 3. On the Welcome screen of the InstallShield Wizard, click Next. 4. After installation has been completed, restart the computer. AGS104T User’s Manual... -
Page 52: Intel Me Drivers Installation
1. Click Intel and then Intel(R) Amston Lake Chipset Drivers. 2. On the Welcome screen, click Next. 3. Click Next to accept the destination folder or click Change to choose another destination folder. 4. Click Finish when you have installed the ME components. AGS104T User’s Manual... -
Page 53: Intel® Serial Io Drivers Installation
3. When the Welcome screen appears, click Next to continue. 4. Accept the terms of the license agreement and click Next. 5. On the Readme File Information screen, click Next. 6. On the Confirmation screen, click Next. 7. On the Completion screen, click Finish. AGS104T User’s Manual... -
Page 54: Lan Driver Installation
3.9 LAN Driver Installation 1. Click LAN Card on the left and then Intel LAN Controller Drivers. 2. Click Intel(R) I21x Gigabit Network Drivers. 3. Click Install Drivers. 4. After the drivers have been successfully installed, click Close. AGS104T User’s Manual... -
Page 55: Chapter 4 Bios Setup
Chapter 4 BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: • Main Settings • Advanced Settings • Chipset Settings • Security Settings •... -
Page 56: Introduction
These defaults have been carefully chosen by both AMI and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could make the system unstable and crash in some cases. AGS104T User’s Manual... -
Page 57: Main Settings
BIOS Setup 4.3 Main Settings BIOS Setting Description System Date Sets the date. Use the <Tab> key to switch between the date elements. System Time Set the time. Use the <Tab> key to switch between the time elements. AGS104T User’s Manual... -
Page 58: Advanced Settings
4.4 Advanced Settings This section allows you to configure, improve your system and to set up some system features according to your preference. 4.4.1 CPU Configuration AGS104T User’s Manual... - Page 59 Enable/Disable AES (Advanced Encryption Standard) Intel(R) SpeedStep(tm) Allows more than two frequency ranges to be supported Intel(R) Speed Shift Enable/Disable Intel(R) Speed Shift Technology Technology support. Enabling will expose the CPPC v2 interface to allow for hardware controlled P-states. AGS104T User’s Manual...
- Page 60 4.4.2 Power & Performance BIOS Setting Description CPU – Power CPU – Power Management Control Options Management Control AGS104T User’s Manual...
- Page 61 TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict to support TPM 2.0 devices. Auto will support both, with the default set to TPM 2.0 devices. If not found, TPM 1.2 devices will be enumerated. AGS104T User’s Manual...
- Page 62 Enables / Disables the system ability to hibernate (OS/S4 Sleep State). This option may not be effective with some OS. ACPI Sleep State Selects a ACPI sleep state for the system to enter. Options: Suspend Disabled, S3 (Suspend to RAM) AGS104T User’s Manual...
- Page 63 BIOS Setup 4.4.5 F81964 Super IO Configuration BIOS Setting Description Serial Port Sets Parameters of Serial Ports. Select an optimal Configuration settings for the Super IO device. AGS104T User’s Manual...
- Page 64 4.4.6 Hardware Monitor AGS104T User’s Manual...
- Page 65 The maximum time the device will take before it properly reports itself to the Host Controller. Auto uses default value. For a Root port, it is 100 ms. For a Hub port, the delay is taken from Hub descriptor. AGS104T User’s Manual...
- Page 66 4.4.8 Network Stack Configuration BIOS Setting Description Network Stack Enables / Disables UEFI Network Stack. AGS104T User’s Manual...
-
Page 67: Chipset Settings
2048 MB aperture. To use this feature, disable CSM support. PSMI SUPPORT PSMI Enable/Disable DVMT Pre-Allocated Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memeory size used by the Internal Graphics Device Graphics Configuration VT-d capability AGS104T User’s Manual... - Page 68 4.5.2 PCH-IO Configuration AGS104T User’s Manual...
-
Page 69: Security Settings
Password utility. User Password Sets a user password. Secure Boot Secure Boot feature is Active if Secure Boot is Enabled. Platform Key(PK) is enrolled and the System is in user mode. The mode change requires platform reset. AGS104T User’s Manual... -
Page 70: Boot Settings
Turns on/off the keyboard NumLock state. Quiet Boot Enables / Disables Quiet Boot option. FIXED BOOT ORDER Sets the system boot order PRIORITY UEFI Hard Disk Drive Specifies the boot device priority sequence from BBS Priorities available UEFI hard disk drives. AGS104T User’s Manual... -
Page 71: Save & Exit Settings
Saves the changes done so far as user defaults. Restore User Defaults Restores the user defaults to all the setup options. Launch EFI Shell from Attempts to Launch EFI Shell application filesystem device (Shell.efi) from one of the available filesystem devices. AGS104T User’s Manual... -
Page 72: Appendix
Appendix This section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. • I/O Port Address Map • Interrupt Request Lines (IRQ) • Watchdog Timer Configuration... -
Page 73: I/O Port Address Map
Communications Port (COM3) 0x000002E8-0x000002EF Communications Port (COM4) 0x0000EFA0-0x0000EFBF SMBus - 54A3 0x00003000-0x0000303F Intel(R) UHD Graphics 0x00001854-0x00001857 Motherboard resources 0x00000000-0x00000CF7 PCI Express Root Complex 0x00000D00-0x0000FFFF PCI Express Root Complex 0x00003090-0x00003097 Standard SATA AHCI Controller 0x00003080-0x00003083 Standard SATA AHCI Controller AGS104T User’s Manual... - Page 74 Programmable interrupt controller 0x000000A8-0x000000A9 Programmable interrupt controller 0x000000AC-0x000000AD Programmable interrupt controller 0x000000B0-0x000000B1 Programmable interrupt controller 0x000000B4-0x000000B5 Programmable interrupt controller 0x000000B8-0x000000B9 Programmable interrupt controller 0x000000BC-0x000000BD Programmable interrupt controller 0x000004D0-0x000004D1 Programmable interrupt controller 0x00000060-0x00000060 Standard PS/2 Keyboard 0x00000064-0x00000064 Standard PS/2 Keyboard AGS104T User’s Manual...
-
Page 75: Interrupt Request Lines (Irq)
Intel(R) UHD Graphics IRQ 4294967286~90 Intel(R) Ethernet Controller I226-IT #2 IRQ 4294967291 Intel(R) USB 3.10 eXtensible Host Controller - 1.20 (Microsoft) IRQ 4294967292 Intel(R) USB 3.20 eXtensible Host Controller - 1.20 (Microsoft) IRQ 4294967294 Standard SATA AHCI Controller AGS104T User’s Manual... -
Page 76: Watchdog Timer Configuration
81866 watch dog program\n"); SIO = Init_F81964(); if (SIO == 0) printf("Can not detect Fintek 81866, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); bTime = strtol (argv[1], endptr, 10); AGS104T User’s Manual... - Page 77 //--------------------------------------------------------------------------- void DisableWDT(void) unsigned char bBuf; Set_F81964_LD(0x07); //switch to logic device 7 bBuf = Get_F81964_Reg(0xFA); bBuf &= ~0x01; Set_F81964_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_F81964_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_F81964_Reg(0xF5, bBuf); //disable WDT //--------------------------------------------------------------------------- AGS104T User’s Manual...
- Page 78 (ucDid == 0x07) //Fintek 81866 goto Init_Finish; } F81964_BASE = 0x00; result = F81964_BASE; Init_Finish: return (result); //--------------------------------------------------------------------------- void Unlock_F81964 (void) outportb(F81964_INDEX_PORT, F81964_UNLOCK); outportb(F81964_INDEX_PORT, F81964_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81964 (void) outportb(F81964_INDEX_PORT, F81964_LOCK); //--------------------------------------------------------------------------- void Set_F81964_LD( unsigned char LD) Unlock_F81964(); AGS104T User’s Manual...
- Page 79 #define F81964_DATA_PORT (F81964_BASE+1) //--------------------------------------------------------------------------- #define F81964_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81964_UNLOCK 0x87 #define F81964_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81964(void); void Set_F81964_LD( unsigned char); void Set_F81964_Reg( unsigned char, unsigned char); unsigned char Get_F81964_Reg( unsigned char); //--------------------------------------------------------------------------- #endif // F81964_H AGS104T User’s Manual...
Need help?
Do you have a question about the AGS104T and is the answer not in the manual?
Questions and answers