System Operation - KwiKool KPHP Series Operation Manual

Lowering or raising the set point will not change the
temperature of the Supply Air. For best results al-
ways adjust the set point to a temperature at which
your KwiKool System can cycle on and off to avoid
operational issues such as freezing or rapid fan cy-
cling.
KwiKool Systems are designed to maintain the set
point when sized properly. Constant operation
without achieving the set point may shorten the ex-
pected operational life of your system.
Les systèmes KwiKool sont conçus pour maintenir
le point de consigne lorsqu'ils sont correctement
dimensionnés. Un fonctionnement constant sans
atteindre le point de consigne peut raccourcir la du-
rée de vie opérationnelle prévue de votre système.
In COOL mode the lowest set point temperature
available for your KPHP is 60 F, and the highest
setting is 95 F. The control will not allow adjust-
ments beyond these ranges.
C. SYSTEM OPERATION
The control memory holds the last parameters en-
tered, including ON and OFF, if power is turned off
or lost and then restored.
1. Press the ON/OFF icon. A short press on this button turns the system on or off and the
systems operates in the last parameter that was entered in operating Mode. The chosen
operation will be displayed on the right side of your display.
2. A short press on the UP or DOWN arrows raises or lowers the set point in the current op-
erational mode.
3. A short press on the MODE icon changes the operating mode to COOL, HEAT, FAN,
AUTO SWITCH HEAT/COOL (Optional) which is signified by both and displayed simul-
taneously.
NOTE
CAUTION
PRUDENCE
NOTE
NOTE
14