Advertisement
Quick Links
860681093
Revision B / Sep 2024
www.commscope.com
CPP Modular Shielded NETCONNECT
General
This CommScope
®
Patch Panel (CPP) shielded modular panels is available in a 24-port, straight.
The panel consists of a rack mounted base unit with an integrated rear cable management. The panel
comes with fixed port numbering 1 to 24. The panel mounts in a 19-inch (483mm) equipment rack with
universal hole spacing.
The panel can be used in an Unshielded and Shielded NETCONNECT
the SL and the SLX jacks.
Ordering information is listed below:
Material
ID
760256625 CPP-SMOD-SL-1U-E-24
Parts List
Parts Included
• 1 x Panel with integrated rear cable management
• 4 x Hook-and-loop straps
• 2 x M5 grounding points
Part No.
Shielded Modular Panel, SL, 1U, 24 port, Black
Instruction Sheet
®
panel
®
installations and together with
Description
Tools Required
• Phillips head screwdriver
• Flat blade screwdriver, max 2.9mm dia.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CommScope CPP-SMOD-SL-1U-E-24
Summary of Contents for CommScope CPP-SMOD-SL-1U-E-24
- Page 1 SL and the SLX jacks. Ordering information is listed below: Material Part No. Description 760256625 CPP-SMOD-SL-1U-E-24 Shielded Modular Panel, SL, 1U, 24 port, Black Parts List Tools Required • Phillips head screwdriver Parts Included • 1 x Panel with integrated rear cable management •...
- Page 2 860681093 www.commscope.com Instruction Sheet Installation of Panel Step 1 – Populate Panel with Jacks 1. Connect cables to jacks per instructions provided with the individual jacks. 2. Populate panel with jacks and route cabling as shown. Note: Secure cables using the hook-and-loop straps provided with the panel.
Need help?
Do you have a question about the CPP-SMOD-SL-1U-E-24 and is the answer not in the manual?
Questions and answers