6-1.1 Load Filament - XYZ Printing da Vinci 1.0 User Manual
Hide thumbs
Also See for da Vinci 1.0:
- User manual ,
- Product manual (7 pages) ,
- Product manual (7 pages)
Advertisement
da Vinci 1.0/1.0A User Manual
6-1.1 LOAD FILAMENT
<
P 13
1.Choose "CHANGE FILAMENT" > "LOAD
FILAMENT".
2.Please wait for extruder to reach
working temperature.
3. Push the filament through the filament
guide tube to the hole of the extruder and
press "OK" button.
4. Please follow instructions on the panel
and press "OK" to finish this process; it is
normal if filament color comes out not you
excepted in the beginning . Some filament
left over inside the extruder form last
printing.
V3
Advertisement
Need help?
Do you have a question about the da Vinci 1.0 and is the answer not in the manual?