XYZ Printing da Vinci 1.0 User Manual page 9

da Vinci 1.0/1.0A User Manual
Chapter 5 Load the Filament
Install Cartridge
Remove filament
1
stopper and tape.
Push the filament through the filament guide tube to the hole of the
4
extruder and press "LOAD FILAMENT" function on the display menu.
Note: Before pushing the filament into the guide tube, it is advised to cut the tip of the filament off at a 45˚ angle with a cutting pliers, filament loading will be easier.
*
P 9
Install the new filament
2
cartridge into the empty slot.
Place and push to click the
3
cartridge locker into the slot.
Tips:Grasping the release arms while inserting, it
will make it easier to push filament into the extruder.
V3