XYZ Printing da Vinci 1.0 User Manual page 8

da Vinci 1.0/1.0A User Manual
Chapter 4 Connect the Cable
<A. USB Port / B. Power Outlet>
Warning
● Make sure to set the power switch to the "off " position before inserting the power cord.
● Make sure the power cord is properly connected. Incorrect use may cause damage to the printer.
● Make sure to remove the power cord from printer if you are storing or not using the printer for an extended
period of time.
● Make sure to avoid power strips to power the printer . Use a wall outlet.
Connect USB Cable and Power Cord
Connect the printer power cord and USB cable to the back of the printer.
Power On the Printer
Please switch the power button to "I" icon ,the information of printer will be shown on the panel, it
is ready to print.
*
P 8
Control Panel
Display Panel
V3