Table of Contents
Advertisement
HDPREPEZ Utility
The HDPREPEZ utility automatically configures your NEC Versa's system's save-to-
file (STF) area on the hard disk drive.
Note
the NECUTILS/HDPREP directory.
Using the HDPREPEZ Utility
In Windows 98, run the HDPREPEZ utility if you increase the memory capacity in
your NEC Versa beyond the factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1.
Go to Start, Shut Down, Restart the computer in MS-DOS mode.
At the c: prompt, type
2.
A message displays asking you to confirm your command.
Press the indicated key to confirm your command.
3.
4.
At the c: prompt, type
\necutils\hdprep directory.
5.
Type
Versa for the newly installed memory.
6.
Power off your system and then power on. A file, large enough to accommodate
your system's memory is created on the hard disk drive.
SpeedStep Applet
Some processors that ship with the NEC Versa FXi notebook computer include the
®
Intel
on your NEC Versa, optimizing processing speed and conserving battery life.
If your processor is equipped with SpeedStep technology, an icon appears on your
taskbar allowing you to adjust processing properties. However, the default settings are
recommended for optimal performance and battery conservation.
For more details about the HDPREPEZ utility, see the HDPREPEZ.TXT file in
HDPREPEZ
and press
SpeedStep technology that allows you to customize high-performance computing
and press
LOCK C:
cd \necutils\hdprep
Enter
. The utility automatically prepares your NEC
Using the Operating System and Utilities 4-7
.
Enter
and press
Enter
to change to the
Advertisement
Table of Contents
