Table of Contents
Advertisement
Power Button
The Power button is a "smart" switch, meaning that it recognizes when the system is in
Standby mode. If in Standby mode, you cannot power off until you slide the Power
button to the right to resume operation. (The BIOS parameter "System Switch" must be
set to "Sleep.")
Put the unit in Standby mode when you need to be away from your system for a short
period of time and want to return to where you left off. Standby mode shuts down all
devices in the system while retaining data and system status. Go to Start, Shut Down,
Standby to put your system into Standby mode.
Use the Power button in the following ways:
— Slide the Power button to the right to power on.
— Slide the Power button to the right to resume from Standby mode and proceed
— Hold the Power button in place for 4 or more seconds to power off the system
Keyboard Panel
The NEC Versa keyboard offers the following features, which are described after the
figure.
A – Function Keys
B – Numeric Keys
C – Windows
1-8 Introducing Your NEC Versa
with normal operation.
(power override). Only use this option if you cannot power off your system
using Start, Shut Down.
®
keys
Keyboard
D – Cursor Control Keys
E – Control Keys
Advertisement
Table of Contents
