Table of Contents
Advertisement
Internal Modem
Your NEC Versa FXi system ships with a V.90/K56flex™ internal modem that allows
you to connect to the Internet, send a fax, or access your email.
Note
international telephone adapter, available at most electronics supply stores.
internal modem.
Connecting the Internal Modem
Follow these steps to connect an RJ-11 telephone cable to the internal modem.
1.
Locate the RJ-11 telephone cable that ships with your NEC Versa. Each end of the
cable has an RJ-11 connector that plugs into a standard telephone outlet.
Locate the RJ-11 port on the left side of your system and open the cover.
2.
3.
Carefully plug the RJ-11 telephone cable into the RJ-11 port.
Connect the other end of the RJ-11 telephone cable into an (analog) phone jack.
4.
Now you are ready to configure your modem for internet or email access!
6-6 Communicating with Your NEC Versa
When using a modem outside the U.S. and Canada, you might need an
Use only a 26AWG phone line cord when connecting the
Connecting the RJ-11 telephone cable
Advertisement
Table of Contents
