NEC VERSA FXI Manual page 51

Parameter
Panel Brightness
Suspend Warning Tone
Remote Power On
Wake Up Alarm
Resume Alarm Time
1
Available when power savings is set to Custom
2
Resume alarm time is selectable when wake up from suspend alarm is set
System Switch — Sets the Power button as a power switch or a sleep button.
!
Power Management Under AC — Specifies whether to enable power management
!
features when AC power is in use. When AC power is connected to your NEC
Versa system, power management is usually disabled. If you enable this parameter,
the system automatically activates the power management profile you set, even
when AC power is used.
Power Savings Level — Specifies one of four levels of power management. (Not
!
applicable in Windows 2000/98 with ACPI.)
— High Performance — provides good battery life and best performance with only
— Longest Life — provides best battery life, the maximum amount of power
— Off — disables power management and all device timeouts. Works well in an
— Custom — lets you define power management levels and specific device
3-12 Using the BIOS Setup Utility
Power Management Setup
2
minimal power conservation. Use while on the road or traveling short distances.
savings, and good performance. Use while traveling long distances.
office environment while powering your NEC Versa with AC power.
timeouts according to your own needs and present environment. Custom lets
you set the following timeouts.
Option
CPU Speed Control
Hard Disk Timeout
Default Alternate Setting(s)
Setting
Auto User Defined
Enabled Disabled
Disabled Enabled
Disabled Enabled
Off Set time in 5 min. increments when
Wake Up Alarm is set.
.
Custom Timeout Options
Definition
Sets CPU performance at one of four levels.
Sets the time delay before your hard disk powers
down.
.