Table of Contents
Advertisement
Powering On Your System
Power on the system as follows:
Locate the latch on the front of the LCD panel, slide it to the right, and raise the
1.
panel.
Locate the Power button and slide it to the right to turn on system power. For
2.
additional information about Power control buttons and power LEDs, refer to
Chapter 1, "Introducing the NEC Versa."
Note
system, you may encounter a warning message suggesting that a problem exists with
the hibernation file on your system. The warning message is inaccurate. To disable this
message, simply enable hibernate support. See the section "Windows 2000 Hibernate,"
in Chapter 3, for details about enabling hibernate support.
Main Battery Pack
The NEC Versa comes with a rechargeable Lithium-Ion (Li-Ion) battery pack that's
easy to install and remove.
A – Battery Connectors
the following:
!
Keep the battery away from extreme heat.
!
Keep metal objects away from the battery connectors to prevent a short circuit.
Make sure the battery is properly installed in the battery bay.
!
Read the precautions printed on the battery.
!
2-6 Getting Started
When powering on your NEC Versa running the Windows 2000 operating
Standard Lithium-Ion Battery
To prevent accidental battery ignition or explosion, adhere to
B – Alignment Grooves
Advertisement
Table of Contents
