Romik 2154 V2 Installation Instructions

Running boards

Download this manual

Installation Instructions

REV 5 08/01/22

Hardware

Torque Aluminum Torque Steel to Steel

M6 Bolt

3 ft-lbs.

M8 Bolt

7 ft-lbs.

M10 Bolt

16 ft-lbs.

M12 Bolt

28 ft-lbs.

ATTENTION: Use correct torque settings to avoid

14 ft-lbs.

damaging the running boards and or mounting

35 ft-lbs.

brackets. Failure to do so will void your warranty. If

64 ft-lbs.

you have any questions, please contact our technical

112 ft-lbs.

team at 1-866-717-6645

Part No.

2154 V2

Product: Running Boards

Application:

Ford Bronco 2DR 2021+

Level of Difficulty:

2 3 4 5

Installation Time: 60 Min

Need help?

Do you have a question about the 2154 V2 and is the answer not in the manual?

Page 1 Part No. 2154 V2 Product: Running Boards Application: Ford Bronco 2DR 2021+ Installation Instructions Level of Difficulty: 2 3 4 5 Installation Time: 60 Min REV 5 08/01/22 ATTENTION: Use correct torque settings to avoid Hardware Torque Aluminum Torque Steel to Steel M6 Bolt 3 ft-lbs.
Page 3 Installation Instructions “DRP” 2154 V2 Bracket Kit Thank you for choosing the Romik DRP System. This system allows you to adjust the brackets from 0 to 3-inch drop. If you ordered the optional DRP cover you can customize them to match the desired height by cutting on the lines inside the cover.
Page 4 2X per year. Wash often with mild soap and make sure to remove all soap residue. Many car automatic carwashes use a strong soap, make sure to use enough water to remove all residue. For video instructions on how to clean your Romik products please click here https://romik.com/cleaning...