Advertisement
Quick Links
Installation Instructions
REV 3 04/15/21
Hardware
M6 Bolt
M8 Bolt
M10 Bolt
M12 Bolt
Torque Specifications
3 ft-lbs.
7 ft-lbs.
16 ft-lbs.
28 ft-lbs.
Part No.
Product: Running Boards
Application:
Subaru Forester 2014 - 2018
Level of Difficulty: 1 2
Installation Time: 90 min.
ATTENTION: Use correct torque settings to avoid
damaging the running boards and or mounting
brackets. Failure to do so will void your warranty.
If you have any questions please contact our technical
team at 1-866-717-6645
3614
3
4 5
Advertisement
Related Manuals for Romik RB2
Summary of Contents for Romik RB2
- Page 1 Part No. 3614 Product: Running Boards Application: Installation Instructions Subaru Forester 2014 - 2018 Level of Difficulty: 1 2 Installation Time: 90 min. REV 3 04/15/21 Hardware Torque Specifications ATTENTION: Use correct torque settings to avoid M6 Bolt 3 ft-lbs. damaging the running boards and or mounting M8 Bolt 7 ft-lbs.
- Page 3 Important Install Tip: When installing Romik HTC inserts follow the sequence below. Make sure the HTC is seated correctly and do not use power tools as this will only spin the insert and possibly damage it. Test by tugging on it before installing braket.
- Page 4 Step 5: Proceed to last page of this manual for running board install instructions and torque values For Technical support please call our team at 1-866-717-6645 and one of our experts will assist you with this installation. Thank you for choosing Romik.
- Page 5 NOTE: Use of power tools will damage the bottom of the running board and void your warranty. 1) Flip your Romik running boards onto a flat surface, make sure to place the running boards on a towel or cardboard in order to protect the surface Figure 1.
Need help?
Do you have a question about the RB2 and is the answer not in the manual?
Questions and answers