Advertisement
Quick Links
Installation Instructions
REV 5 09/18/23
Hardware
Torque Aluminum Torque Steel to Steel
M6 Bolt
3 ft-lbs.
M8 Bolt
7 ft-lbs.
M10 Bolt
16 ft-lbs.
M12 Bolt
28 ft-lbs.
Attention: Please make sure that you have the latest instructions
from Romik.com
Part No.
Product: Running Boards
Application:
Level of Difficulty: 1 2 3
Installation Time: 120 Min.
ATTENTION: Use correct torque settings to avoid
14 ft-lbs.
damaging the running boards and or mounting
35 ft-lbs.
brackets. Failure to do so will void your warranty. If
64 ft-lbs.
you have any questions, please contact our technical
112 ft-lbs.
team at 1-866-717-6645
3944
Toyota Highlander 2020 – Present
Toyota Grand Highlander 2024 – Present
Lexus TX 2024 - Present
4
5
QR Scan
Advertisement
Related Manuals for Romik RB2
Summary of Contents for Romik RB2
- Page 1 Failure to do so will void your warranty. If M10 Bolt 16 ft-lbs. 64 ft-lbs. you have any questions, please contact our technical M12 Bolt 28 ft-lbs. 112 ft-lbs. team at 1-866-717-6645 Attention: Please make sure that you have the latest instructions from Romik.com QR Scan...
- Page 3 Important Install Tip: When installing Romik HTC inserts follow the sequence below. Make sure the HTC is seated correctly and do not use power tools as this will only spin the insert and possibly damage it. Test by tugging on it before installing braket.
- Page 4 Installation Instructions 3944 Bracket Kit Step 2: Remove factory rubber plug and install provided HTC 243 Figure 3. Attach the main front bracket as shown Figure 4. Make sure these are loose and do not tighten. Figure 3 Pasenger side: The process is the same as driver’s side. Undo inner part of panel just enough to expose the mounting area.
- Page 5 Step 6: Proceed to last page of this manual for running board install instructions and torque values For Technical support please call our team at 1-866-717-6645 and one of our experts will assist you with this installation. Thank you for choosing Romik.
- Page 6 2X per year. Wash often with mild soap and make sure to remove all soap residue. Many car automatic carwashes use a strong soap, make sure to use enough water to remove all residue. For video instructions on how to clean your Romik products please click here https://romik.com/cleaning...
Need help?
Do you have a question about the RB2 and is the answer not in the manual?
Questions and answers