Advertisement
Quick Links
Installation Instructions
REV 4 05/01/2022
Hardware
Torque Aluminum Torque Steel to Steel
M6 Bolt
3 ft-lbs.
M8 Bolt
7 ft-lbs.
M10 Bolt
16 ft-lbs.
M12 Bolt
28 ft-lbs.
14 ft-lbs.
35 ft-lbs.
64 ft-lbs.
112 ft-lbs.
Part No.
2162v4
Product: Running Boards
Application:
Ford Explorer 2020+
Lincoln Aviator 2020+
Level of
Difficulty:1
Installation Time: 60 Min
ATTENTION: Use correct torque settings to avoid
damaging the running boards and or mounting
brackets. Failure to do so will void your warranty. If
you have any questions, please contact our
technical team at 1-866-717-6645
2 3 4 5
Advertisement
Related Manuals for Romik RB2
Summary of Contents for Romik RB2
- Page 1 Part No. 2162v4 Product: Running Boards Application: Ford Explorer 2020+ Installation Instructions Lincoln Aviator 2020+ Level of Difficulty:1 2 3 4 5 Installation Time: 60 Min REV 4 05/01/2022 Hardware Torque Aluminum Torque Steel to Steel ATTENTION: Use correct torque settings to avoid M6 Bolt 3 ft-lbs.
- Page 3 Step 4: Proceed to last page of this manual for running board install instructions and torque values For Technicall support please call our team at 1-866-717-6645 and one of our experts will assist you with this installation Thank you for choosing Romik...
- Page 4 NOTE: Use of power tools will damage the bottom of the running board and void your warranty. 1) Flip your Romik running boards onto a flat surface, make sure to place the running boards on a towel or cardboard in order to protect the surface Figure 1.
Need help?
Do you have a question about the RB2 and is the answer not in the manual?
Questions and answers