Mouse - NEC Versa 2200C Series Manual

Mouse

You can add an external mouse to your NEC Versa 2200C
to use in place of the NEC VersaGlide for moving the
pointer. Use the following procedure to connect a PS/2-style
mouse to the system.
1. Check that the NEC Versa 2200C is powered off.
Make sure the NEC Versa 2200C is powered off
whenever you add or remove a mouse. Doing so
with the power on may damage either the system or
the mouse.
Connect the mouse cable connector to the key-
2.
board/mouse port on the system. (The keyboard/mouse
port is the first one on the left.)
2-18 Learning to Use the Hardware
!
CAUTION
Connecting an external mouse