NEC Versa 2200C Series Manual page 17

Keyboard and Mouse Port — Use the standard PS/2 port
to connect an external PS/2 mouse or an external PS/2
keyboard. If you want to connect both, use the optional
NEC Versa Y Adapter. (See the online NEC Versa 2200C
Options Catalog.)
— Use this to connect an external modem or a
Serial Port
serial printer. You can tell that it's serial by looking at the
cable. A serial cable has a 9-pin connector.
Parallel Port — Use to connect a parallel printer, tape
drive, or CD-ROM reader. A parallel device has a 25-pin
cable connector.
— Use this connector to attach the
Docking Connector
NEC Versa 2200C to a MiniDock 2000 or MediaDock
2000 to further expand your options.
— Use this 15-pin connector port to attached
Video Port
an external CRT monitor to your NEC Versa 2200C. You
can run both the LCD display and the external monitor si-
multaneously, or each alone.
AC Power Jack — Use the power jack to attach the NEC
Versa 2200C to an AC power source such as the AC
adapter or the optional car adapter.
Getting to Know Your NEC Versa 2200C 1-9