NEC Versa 2200C Series Manual page 86

AT COMMANDS
COMMAND DESCRIPTION
\N6 Auto-reliable LAPM, MNP, and buffer mode.
\Q0 Disable DTE flow control.
\Q1 Bi-directional Xon/Xoff.
\Q2 Unidirectional CTS interface signal.
Bidirectional hardware flow control. (RTS/CTS)
\Q3
Disconnects if no activity for specified time; use
\T0
values 0-90 (seconds). If value = 0 (default), the
time is disabled.
Disable MNP responses.
\V0
\V1 Enable MNP responses.
%C0 Disable Data Compression.
Enable Data Compression.
%C1
%E0 Disable Auto Retrain.
Enable Auto Retrain.
%E1
Disable Caller ID.
#CC0
Format modem for single message sent to DTE.
#CC1
Modem Commands, Registers, and Codes C-7