Advertisement
Remove a system lamp (LED) per Figure 5-6 and the following steps.
Remove the system unit cover and front panel as previously described.
Unplug the lamp from its connector on the system board.
Press in on the lamp holder tabs and push the lamp assembly out through its mounting hole.
Remove the lamp assembly from the system unit.
Figure -6 Locating the System Lamps
Suspend Switch Removal
Remove the suspend switch per Figure 5-7 and the following steps.
Remove the system unit cover and front panel as previously described.
Unplug the suspend switch from its connector on the system board.
Press in on the four switch holder tabs and pull the suspend switch holder out and away from its mounting
hole.
Remove the suspend switch from the switch holder.
Advertisement
