Advertisement
DIMM Removal
Use the following procedure to remove a DIMM.
CAUTION: Reduce static discharge by touching the system's metal chassis.
Remove the system unit cover.
Locate the DIMM sockets.
To remove a DIMM from its socket, press the plastic clips at the outer edges of the socket away from the
DIMM.
Carefully rock the DIMM to pull it from the socket.
Figure -8 Removing a DIMM
Store the DIMM in an antistatic bag (available at electronic supply stores) or a cardboard box.
Repeat steps 2 through 4 if you need to remove another DIMM.
DIMM Installation
Use the following procedure to install a DIMM.
Remove the system unit cover.
Locate the DIMM sockets.
Remove any currently-installed DIMMs that are not needed. See "DIMM Removal" in this chapter.
CAUTION: Before installing a DIMM, reduce static discharge by touching the system's metal chassis.
To install a DIMM, align the module with an empty socket. Make sure that the notches on the DIMM line up
with the keys in the sockets.
Insert the DIMM into the socket. Close the plastic clips at both ends of the socket.
Advertisement
