Advertisement
Figure -2 Locating the Battery
Use fingers to carefully pull the battery up until it is clear to slide the battery out of the socket.
WARNING: The battery can explode if it is incorrectly replaced or improperly discarded. Use only the same
battery or an equivalent type recommended by the manufacturer when replacing the battery. Lithium acts as a
catalyst when exposed to water and causes spontaneous combustion on contact. Discard used batteries
according to the manufacturer's instructions.
With the positive (+) side facing up, press the new battery into the socket.
Replace the system access cover.
Connect external peripherals and power cables.
Run Setup to reconfigure system parameters (see Section 2).
Advertisement
