Table of Contents
Advertisement
When both the User Password and Supervisor Password are
Enabled, only the Supervisor Password gives you full
access to all Setup fields.
Set User or Supervisor Password
The password fields allow you to establish a user-level
password or supervisor-level password. Once the password
is established, it must be entered to access Setup during
POST.
Use the following procedure to set a password.
NOTE
subset of the supervisor password. If you do, the
system may only respond to the user password.
1.
Using your left or right arrow keys, select
the menu bar. The Security menu appears.
2.
Select
Password
NOTE
enabled, the Setup Utility can only be accessed by
entering the password.
4-20 Using Tools and Utilities
Do not create a user password that is a
Set Supervisor Password
with the up or down arrow keys.
Once the Supervisor Password feature is
Security
from
or
Set User
Advertisement
Table of Contents
