Table of Contents
Advertisement
Press the module firmly into the socket.
5.
Make sure the plastic clips at either end of the module
6.
click closed.
Replace the drive cage (see "Replacing the Drive
7.
Cage").
Replace the system unit cover (see "Replacing the
8.
Covers").
NOTE
memory displayed at the Power-On Self-Test or in
Windows with the amount of memory that you
installed, check that you installed the memory
modules correctly.
PROCESSOR UPGRADE
The system has two S.E.C. cartridge Slot 1 connectors.
These are 242-pin edge connectors. When the processor is
inserted the VID pins program the voltage regulator on the
system board to the required voltage for the processor. The
processor is secured to the connector in a retention
mechanism.
5-22 Installing Options
If you find a discrepancy in the amount of
Advertisement
Table of Contents
