Table of Contents
Advertisement
Advanced Menu
Selecting "Advanced" from the Main menu displays a menu
with the following options.
PnP O/S
The PnP field indicates if the computer's operating system
is configured to use Plug and Play devices. Choose "Yes" if
you are using a system that has Plug and Play. The default
for systems running the Windows 95 operating system is
"Yes." The default for systems running the Windows NT
operating system is "No."
Reset Configuration Data
Use this setting to clear CMOS (by selecting "Yes" and
rebooting) if the system parameters get corrupted. The
default is "No." (A "Yes" selection changes to "No" after
the system is rebooted.)
Enable ECC Memory
This field is only displayed when Error Checking and
Correcting (ECC) DIMMs are installed in the system. The
field defaults to "Enabled."
L2 Cache ECC Support
L2 Cache ECC support is selectable in systems with either
a 233-MHz or 266-MHz Pentium II processor. In a system
with a faster processor, the field is always enabled.
MPS Version
Select the MP Specification revision level from this field.
Most systems should be set to "1.4" (the default) but some
must be set to "1.1."
Using Tools and Utilities 4-11
Advertisement
Table of Contents
