Setting System
4
Parameters
This chapter provides information on the NEC utilities that
ship with your system. The following topics are covered in
this chapter.
T
Setup utility
T
Flash utility
T
Product Recovery utility (multimedia systems only)
THE SETUP UTILITY
The Setup utility program allows you to enter system
configuration information and control special features of the
system.
NOTE
correct system parameters for your configuration.
Unless you add optional hardware, you do not need
to run Setup to operate your system. However, you
might wish to run the Setup utility to set features
that customize your system, such as security
features.
Your system ships from the factory with the
Setting System Parameters 4-1