System Recovery - NEC POWERMATE P ETC User Manual

3. Click "OK."
If you replaced any Windows system files, exit Windows
4.
and reboot the system.

System Recovery

If your preinstalled software becomes unusable and you
cannot reboot from the hard disk, you can restore your
system to its initial shipping configuration.
System Recovery erases and resets the hard disk
completely before reinstalling the files.
If you are doing a Full System Recovery, ALL files
on the hard drive will be deleted and replaced by
the factory installed files.
You will lose your data and you will need to reinstall
any software you installed yourself.
A Full System Recovery should only be used if the
preinstalled software is unusable. If you are unsure
about using this procedure, call the NECCSD/ETC
Technical Support Center. The support personnel
will help you determine if this is your situation. See
Chapter 7 for the NECCSD/ETC technical support
telephone number.
The System Recovery requires booting from the Product
Recovery CD. Use the following procedure to start the
recovery procedure. Follow it carefully.
With system power on, insert the Product Recovery CD
1.
into the CD-ROM reader.
Turn system power off.
2.
!
CAUTION
Setting System Parameters 4-37