Parallel Port Interface
The parallel port may be "Auto" detected or "Disabled."
The default is "Auto." When "Auto" is selected, the first
free LPT port is assigned regardless of what is selected. The
parallel port address options are as follows.
T
Disabled
T
LPT3, 3BCh, IRQ5 or IRQ7
T
LPT1, 378h, IRQ5 or IRQ7
T
LPT2, 278h, IRQ5 or IRQ7
T
Auto
Parallel Port Type
The Parallel Port Type field options are as follows.
T
Compatible sets the parallel port to the standard AT
compatibility.
T
Bi-directional (default) sets the parallel port to
input/output mode only.
T
ECP
Port (ECP) mode.
T
EPP
Port (EPP) mode.
Audio Interface
For multimedia systems, this option "Enables" the Vibra
16C audio subsystem. If this option is "Disabled," then the
I/O resources and addresses that are used to support the
audio interface are freed. The default is "Enabled."
Hardware Monitor Interface
This option "Enables" or "Disables" the hardware monitor
subsystem. The default is "Enabled."
sets the parallel port to the Enhanced Capabilities
sets the parallel port to the Enhanced Parallel
Setting System Parameters 4-17