Icom IC-24AT Instruction Manual page 36

HEN:
EN 12 BEEP AND POWER SAVER
12-2 Power saver function
um POWER ON
The power saver function reduces the current drain to
conserve battery power while receiving. The function is
activated 5 sec. after the squeich closes or no switch is
pushed.
A duty cycle of the power saver function (standby : circuit off)
can be selected 07 turned OFF 10 suit your desired operation.
1) Turn power OFF.
2) While pushing the following switches, turn power ON.
[8] +
| Standby | Power save 125 msec.
Circuit off ‫سا‬ ‫مس‬‎ 500 0٥٥٥.
125 msec.
approx. 2 sec.
usina SET MODE
9 5°; DI
II oC
rin‫‏‬ ‫ا‬ ‫ل‬ ‫ا‬
KARER‫‏‬
py
nz feig
TI
Beep is emitted. Beep is not emitted.
1) Push [A] (CLR) to set VFO mode.
NOTE: Once the function is set on a band, the setting
affects another band.